User manual LA CROSSE TECHNOLOGY WS-7048U

[. . . ] Connect the wire of the rain gauge to the jack of the Rain Meter 2. Observing the correct polarization, insert 2 x AA, IEC LR6 batteries into the compartment at the back of the Rain Meter and replace the cover. All segments of the LCD will light up briefly. Then 0. 00 inch or 0. 00mm (default in inch units) will be displayed in all 3 counters. [. . . ] Carefully pull out the stand and place the Rain Meter in the desired location. Wall Mounting Place a screw in the desired location leaving the head extended about ¼" from the wall. Hang the Rain Meter on the screw ensuring that the Rain Meter locks into place. Positioning The Rain Gauge Position the connected rain gauge outdoor to collect rainfall data (maximum length of wire: 33 feet/ 10m). Ensure that the rain gauge is placed in a secure and flat location where it can properly collect properly rain quantity without obstruction. Ensure also that the rain gauge is securely mounted at the appropriate location otherwise it may not transmit accurate rainfall data. Maintenance · Avoid placing the units in locations prone to extreme temperatures, vibration and shock since these may cause damage and inaccurate readings. · When cleaning the display and casing of the Rain Meter use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the casing and LCD. · Do not submerge the Rain Meter in water. · Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended type. · Please do not make any attempt to make any repairs to the units. Return them to their original point of purchase for repair by qualified personnel. Opening and tampering with the units will invalidate the warranty. Specifications Rainfall display range: 0 to 9999. 99 inch/ 0 to 9999. 9 mm (overflow and will automatically restart from zero) Rain meter data updating: immediate when raining Transmission period-Rain Sensor: immediate when raining Rain gauge wire length: about 33 feet/ 10 meters Power source: 2 x AA, IEC LR6 1. 5V batteries Rain Meter dimensions (LxWxH) Rain Meter: 3. 62"x1. 22"x4. 52"/ 92x31x15mm Rain Sensor: 5. 51"x2. 75"x5. 39"/140x70x137mm Liability Disclaimer · The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences occurring should an inaccurate reading take place. · This product is not to be used for medical purposes or for public information. · This product is designed for strict home use as an indication of rain quantities and is not 100% accurate. Readouts given by this product should be taken only as an indication and not as being totally accurate. · The specifications of this product may change without prior notice. · No part of this manual may be reproduced without written consent of the manufacturer. WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. [. . . ] THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. [. . . ]