User manual LA CROSSE TECHNOLOGY WS-7058U

[. . . ] WS-7058U Wireless 433 MHz Wireless Weather Center Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/Additional Equipment: Quick Set-Up Guide: Detailed Set-Up Guide Battery Installation: LCD Screens: Program Mode Function Buttons: LCD Contrast: 12/24-hour Time Display: Time Setting: Time Zone Setting: Date Setting: Selecting °F or °C and Inches or Millimeters: Setting Forecast Sensitivity: Displaying Relative/Absolute hPa/inHg: Manually Setting Relative Air Pressure: Setting Bar Graph Display: Features & Operations Viewing Date or Time: Minimum & Maximum Records (Indoor, Outdoor, Resetting): Weather Forecast and Weather Icons: Bar Graph Histories (Air Pressure and Rainfall): Rainfall (Quantity & Resetting): Manual setting of Rain Multiplicator: Hard Reset of EEPROM Weather Center Memory: Adding Sensors: Mounting: Maintenance and Care: Troubleshooting: Specifications: Warranty Information: Page 3 3 4-5 5 6 6 6 6-7 7 7 7-8 8 8-9 9 9 9 9-10 10-12 12-13 13-14 14-15 15 15-16 16-19 20 20 21-22 23-24 2 INVENTORY OF CONTENTS 1. WS-7058U--Wireless Weather Center, with table stand (Figure 1). TX4U--Remote Thermo-Hygro (temperaturehumidity) Sensor: Figure 2 includes a mounting bracket/receptor, rain cover, two mounting screws, and adhesive tape (Figure 2). TX5U--Rainfall Sensor: includes a base, rainfall collector, and two mounting screws (Figure 3). [. . . ] Following is a list of the 3 time period icons and a description of what they represent. a blank screen--(the default setting) shows the total accumulated rainfall since the last set-up or manual reset. "1h"--shows the rainfall measurement of the past hour. Information is updated every hour on the half-hour (i. e. "rain icon"--resets automatically at the beginning of a rainfall, it will show and keep track of the current rainfall quantities, once the current rainfall is complete it will display the quantity of that rainfall until a new rain begins, then it will automatically reset. 13 To toggle through the 3 different quantities: 1. Press the RAIN button, the rain icon will appear. Press the RAIN button again, "1h" appears. Press the RAIN button a third time, no icon will be visible. RESETTING RAINFALL INFORMATION A. RAINFALL QUANTITY TOTALS Resetting the Rainfall Quantity Totals will clear the numeric data held under "TOTAL, " resetting to 0. 00 (appearing in LCD 5). From any selected normal display mode: 1. Press and hold the RAIN button for 3 seconds. Resetting will automatically shift to display "TOTAL. " The numeric data under "TOTAL" in LCD 5 will read 0. 00. Note: Resetting the Rainfall Quantity Totals does not affect the Rainfall History represented in the bar graph. MANUAL SETTING OF THE RAIN MULTIPLICATOR Note: The rain multiplicator is the height of rain held in the teeter-totter bucket (inside the rain gauge) before it is tipped. It is preset to a value of 3. 75 tips per mm of rain by the manufacturer prior to shipping; this number produces the most accurate rainfall measurement. There is no need to manually set this number unless it has been changed. Remove the batteries and wait 30 seconds. (This will also reset the Rainfall Quantity Totals). Checking the polarity, install batteries. During the brief 2 seconds that all LCD screens light up, simultaneously press and hold the RAIN and + buttons. Three numbers will appear in LCD 1 ("375" is the default), with the last digit "5" flashing. Note: If "375" is not displayed: 5. Use the + button to change the last digit to a 5 and press the SET button. [. . . ] 5. 07 x 7. 41 inches (130 x 190 mm). 22 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. [. . . ]