User manual LA CROSSE TECHNOLOGY WS-7092U

[. . . ] World Time Center Introduction Congratulations on purchasing this state-of-the-art World Time Center as an example of superior design and engineering. Providing radio controlled time, indoor temperature and humidity displays, outdoor temperature, this unit will never keep you guessing on time, date or current and future weather conditions. Operation of this product is simple and straightforward. By reading this operating manual, the user will however receive a better understanding of the WorldTime Center together with the optimum benefit of all its features. [. . . ] The weekday symbols will be displayed on LCD 1 in the preset language and flashing. Set the desired weekday by use of the "+" key. Press the "SET" key to enter the mode "Month Setting". Reset of all Data Month Setting 1. The month digits on LCD 1 will start flashing. Set the desired month by use of then "+" key. Press the "SET" key to move to the mode "Date Setting". By removing the batteries from the World Time Center all displayed data will be lost. To reset all data perform a basic setup as described in "Reset" above. Data Reception Date Setting Criteria for Reception 1. The digits for the date will start flashing on LCD 1 (Default setting 1). Set the desired date by use of the "+" key. Note: The date can only be set in conjunction with the selected month. I. e. , it is not possible to set the date 30 if the month of February is selected. Press the "SET" key to enter the mode "Setting of Year". For reception and computing of displayed values, the software of the World Time Center performs a number of comprehensive operations (see Index) which are not necessarily important for the user to know. In case the time is not correctly displayed on LCD 2, then please see " WWVB Reception Check". WWVB-Signal Test The World Time Center will automatically start scanning for the WWVB frequency signal (time signal transmission) after the batteries are inserted. at a safe distance from interferring sources such as TV sets), it takes between 6 to 10 minutes to receive the signal. If after 10 minutes of inserting the batteries the WWVB signal is not properly received then check the following list before manually setting the time (see "Time Setting") in programming mode. The distance of the units should be at least 1. 5 - 2. 0 Meters away from interferring sources such as computer monitors or TV sets. Avoid placing the unit onto or in the immediate proximity of metal window frames. Within thick concrete rooms such as basements and tower blocks, the WWVB frequency signal is naturally weaker for reception. [. . . ] · WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. [. . . ]