User manual LA CROSSE TECHNOLOGY WS-7211U

[. . . ] Any walls that the signal will have to pass through will reduce distance. An outdoor wall or window can have up to 30 4 feet of resistance and an interior wall can have up to 20 feet of resistance. Your distance plus resistance should not exceed 80 ft. NOTE: Fog and mist will not harm your remote temperature sensor but direct rain must be avoided. [. . . ] To view the temperature of a different remote temperature sensor unit, press and release the "CH" button. A shift from one number to the next should be observed in the OUTDOOR LCD. 11 Weather Forecast The weather forecasting feature is estimated to be 75% accurate. The weather forecast is based solely upon the change of air pressure over time. The WS7211U averages past air-pressure readings to provide an accurate forecast, creating a necessity to disregard all weather forecasting for 12-24 hours after the unit has been set-up, reset, or moved from one altitude to another (i. e. from one floor of a building to another floor). In areas where the weather is not affected by the change of air pressure, this feature will be less accurate. 12 Weather Icons There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny--indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds-- indicates that the weather is expected to be fair (not that the weather will be sunny with clouds). Clouds with Rain-- indicates that the weather is expected to get worse (not that the 13 weather will be rainy). The weather icons change when the unit detects a change in air pressure. The icons change in order, from "sunny" to "partly sunny" to "cloudy" or the reverse. It will not change from "sunny" directly to "rainy", although it is possible for the change to occur quickly. If the symbols do not change then the weather has not changed, or the change has been slow and gradual. Weather Tendency Arrows Other possible displays in the FORECAST LCD are 2 weather tendency arrows, one that points up (on the left side of the LCD) and one that points down (on the right side of the LCD). These arrows reflect current changes in the air pressure. An arrow pointing up indicates that the air pressure is increasing and the weather is expected to improve or remain good. An 14 arrow pointing down indicates that the air pressure is decreasing and the weather is expected to become worse or remain poor. MOUNTING Note: To achieve a true temperature reading, avoid mounting in direct sunlight. We recommend that you mount the remote temperature sensor on a Northfacing wall. The sending range is 80ft; obstacles such as walls, concrete, and large metal objects will reduce the range. Place both units in their desired location before permanently mounting. Remote Temperature Sensor Remove the mounting bracket from the remote temperature sensor. Mount the bracket in the desired location with either screws or adhesive tape. Insert remote temperature sensor into mounting bracket. 15 Indoor Weather Station The indoor weather station comes with the table stand already mounted. [. . . ] Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service 22 center. [. . . ]