User manual LA CROSSE TECHNOLOGY WS-7394U-AL

[. . . ] WS-7394U Wireless 433 MHz Wireless Weather Station Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/ Additional Equipment About WWVB Quick Set Up Guide Detailed Set Up Guide Battery Installation Start Up Sequence Explanation of LCD Information Function Key Layout Program Mode Overview of Programming Sequence LCD Contrast Setting Time Zone Setting DST ON/OFF Setting Radio-controlled Time ON/OFF Setting 12/24-hour Time Mode Setting Setting the Time/Date Manually Temperature Measuring Units (ºF/ºC) Air Pressure Measuring Units (inHg/hPa) Relative Pressure Setting Forecast Sensitivity Setting Features and Operation Minimum/Maximum Temperature/Humidity Multiple Remote Temperature Sensors Comfort Icon Weather Forecast and Pressure Trend Indicators Weather Icons Weather Tendency Arrows Barometric Air Pressure Reading Air Pressure History Bar Chart Mounting Maintenance and Care Troubleshooting Guide Specifications Warranty Information Page 3 3 4 5 6 7 8 8 8 9 9 9-10 10 10-11 12 12 12 13 14 15-16 16 16 16-17 17 17 17-18 19-20 20 21 22 23-24 2 INVENTORY OF CONTENTS 1. Instruction manual and warranty card ADDITIONAL EQUIPMENT (not included) 1. One wall-mounting screw (optional) ABOUT WWVB (radio-controlled time) The NIST (National Institute of Standards and Technology--Time and Frequency Division) radio station, WWVB, is located in Ft. Collins, Colorado and transmits the exact time signal continuously throughout the United States at 60 kHz. [. . . ] The absolute air pressure reading in the Weather Center cannot be calibrated, only the relative air pressure. Press and release the "SET" button to confirm the forecast sensitivity setting. THE MANUAL SETTING IS NOW COMPLETED 13 FEATURES AND OPERATIONS A. Minimum and Maximum Temperature and Humidity 1. Indoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum indoor temperature and humidity. The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset. From the normal display mode, press and release the "IN" key once to view the indoor maximum temperature and humidity ("MAX" will be displayed above the indoor temperature and humidity). Press and release the "IN" key again to view the indoor minimum temperature and humidity. Press and release the "IN" key again to return to the normal mode (timeout of viewing minimum/maximum values will occur if no keys are pressed for fifteen seconds). b. c. Note: To reset the indoor minimum and maximum temperature and humidity, first display the values you wish to reset (minimum or maximum). Next press and hold the "SET" key for at least three seconds. You will see then that the values will reset to the current temperature and humidity and corresponding time. Outdoor Minimum and Maximum Temperature The indoor weather station automatically stores the minimum and maximum outdoor temperature. The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset. From the normal display mode, press and release the "OUT/+" key once to view the outdoor maximum temperature ("MAX" will be displayed above the outdoor temperature). Press and release the "OUT/+" key again to view the outdoor minimum temperature. Press and release the "OUT/+" key again to return to the normal mode (timeout of viewing minimum/maximum values will occur if no keys are pressed for fifteen seconds). b. c. Note: To reset the outdoor minimum and maximum temperature, first display the values you wish to reset (minimum or maximum). 14 Next press and hold the "SET" key for at least three seconds. You will see then that the values will reset to the current temperature and corresponding time. Multiple Remote Temperature Sensors The WS-7394U is able to receive signals from 3 different remote sensors. These extra remote sensors can be purchased through the same dealer as this unit. A TX4U will monitor the temperature, a TX3U will monitor temperature and display the temperature on its LCD, a TX3UP will monitor the temperature via a probe for measuring soil or water temperatures and a TX6U will monitor the temperature only. [. . . ] All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. [. . . ]