User manual LA CROSSE TECHNOLOGY WS-8007U-O

[. . . ] This Moon Phase Clock regulates the WWVB transmitter. For more information about WWVB please see the NIST website at http://www. boulder. nist. gov/timefreq/stations/wwvb. htm QUICK SET-UP GUIDE 1) Insert two fresh AA batteries into the moon phase clock. 3) If there is no WWVB reception, manually set the time and date (see instructions in the Program Mode section). 5) Mount the WS-8007U in a suitable location where WWVB signals can be received. [. . . ] 3) Press and release the "SET" button to confirm the hour setting and to shift to select the minutes. 4) The minute area will now be flashing. 5) Press and release the "+" button to select the minutes. 6) Press and release the "SET" button to confirm the time setting, and to advance to manually set the calendar. VI) CALENDAR SETTING Note: When the WWVB signal is found, that date will over-ride the manually set date. 1) The default year "00" will be flashing in the date LCD. 2) Press and release the "+" button to select the year (last two digits). 3) Press and release the "SET" button to confirm the year and to set the month. 4) The default month "1" will flash. 5) Press and release the "+" button to select the appropriate month (January = "1", December = "12") 6) Press and release the "SET" button to confirm the month and to set the date. 7) The default date "1" will flash. 8) Press and release the "+" button to select the appropriate date. 6 9) Press and release the "SET" button to confirm the date and to set the weekday. 10) The default weekday "MON" (depends on selected language) will flash. 11) Press and release the "+" button to select the appropriate weekday. 12) Press and release the "SET" button to confirm the calendar settings and to advance to select either 12 or 24-hour time display. VII) 12/24-HOUR SETTING 1) The "12" hour time display will be flashing in the time LCD. 2) Press and release the "+" button to toggle between 12 and 24 hour time. Note: 12-hour uses AM/PM, 24-hour is also known as "military" time. 3) Press and release the "SET" button to confirm the 12/24-hour time display and to advance to select either °F or °C. VIII) SELECTING °F OR °C 1) The default "°F" will be flashing in the time LCD. 2) Press and release the "+" button to toggle between °F and °C. 3) Press and release the "SET" button to confirm the °F or °C selection and exit the Program Mode. [. . . ] Opening the casings invalidates the warranty. Contact La Crosse Technology for Repairs. TROUBLESHOOTING The LCD is faint. Solution: "OFL" appears in the LCD. Problem: Move unit to an area with warmer or cooler surrounding Solution: temperature. [. . . ]