User manual LA CROSSE TECHNOLOGY WS-8010UM

[. . . ] WS-8010U Wireless 433 MHz Giant Radio Controlled Weather Center Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/ Additional Equipment Quick Set-up Detailed Set-Up Guide Battery Installation Program Mode Function Keys/Buttons LCD Contrast Setting Time Zone Setting Daylight Saving Time Setting Language Setting 12/24 hour Time Setting Selecting °F or °C World Time Setting World/Local Time Display Setting Graphic Time Display Options/Settings Time and Date Settings Features About WWVB Weather Forecast Icons/ Tendency Arrows Additional Sensors (Set-Up & Selection) Date/Rainfall Display Rain Gauge Set-Up Minimum & Maximum Records (Indoor, outdoor, & resetting) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information Page 3 3 3-4 5 6 6 6 6-7 7 7 7 8 8-9 9 10 10-11 11-12 12-13 13 13-14 15-16 17 17 18 19 2 INVENTORY OF CONTENTS 1. WS-8010U--Giant Radio Controlled Weather Center. TX4U--Remote Thermo-Hygro (temperature-humidity) includes: mounting bracket/receptor, rain cover, and two mounting screws. Instruction manual and warranty card. ADDITIONAL EQUIPMENT (not included) 1. [. . . ] Note: When setting up multiple sensors it is important to remove the batteries from all existing units in operation, then to insert batteries first into all the sensors, and in numeric sequence. Second install batteries into the Weather Center. Transmission problems will arise if this is not done correctly and if the total time for set-up exceeds 6 minutes. SET-UP OF MULTIPLE SENSORS Note: The first sensor signal that the Weather Center receives is automatically assigned as the "boxed #1. " The 2nd to be received is the "boxed #2, " and the 3rd is the "boxed #3. " 1. It is necessary to remove the batteries from all units currently in operation. Remove the battery covers to all sensor units (new and old). Place all sensors in a numeric sequential order. 11 4. 6. In sequential order, install batteries into the sensors (follow the same battery installation procedures seen in section I. Install batteries into the Weather Center. Follow the Programming Mode instructions to program and set-up the Weather Center. B. SELECTING WHICH SENSOR DATA TO DISPLAY 1. To view the outdoor temperature and humidity from a different sensor, press key #1. A shift from a "boxed #1" to a "boxed #2" should be observed under the DATE DISPLAY (between the Outdoor Temperature and Outdoor Humidity Displays). Press key #1 a second time to shift from the "boxed #2" to the "boxed #3". (Information will display only if you have three sensors in operation). To view information from the first sensor again, press key #1. 2. IV. DATE DISPLAY Note: The DATE DISPLAY defaults to the month/date/year format. This display area can show an alternate way of displaying the date. This changes the DATE DISPLAY from the standard month/date/year to a display showing the weekday/month/date. Press key #2 to change back to the original date display. 2. Key #1 Key #2 Key #3 V. RAINFALL DISPLAY (optional) Note: If the Rainfall feature is opted, its information will display in the Date Display, in two possible configurations. To change what and how the information is displayed, use key #2. Press key #2 again to change from the DATE DISPLAY to the RAIN DISPLAY. [. . . ] 3. 22 x 1. 69 x 6. 96 in (82 x 43 x 177mm). WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. [. . . ]