User manual LA CROSSE TECHNOLOGY WS-8011UM-TWC

[. . . ] WS-8011UM 433 MHz Radio Controlled Temperature Clock Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/ Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Buttons Time Zone Setting DST (Daylight Saving Time) Setting Language Selection Time Setting Calendar Setting 12/24-Hour Setting Selecting °F or °C Features & Operations Changing Display Mode (seconds, temperature) The Alarm Indoor Temperature Remote Temperature Mounting Maintenance & Care Troubleshooting Specifications Warranty Information Page 3 3 4 5-6 6 6 7 7 7-8 8 8 9 10 10-11 11 11 12-13 14 15 16 17-18 2 INVENTORY OF CONTENTS 1) WS-8011UM 2) TX6U remote temperature transmitter 3) Instruction manual and warranty card. ADDITIONAL EQUIPMENT (not included) 1) 2) 3) 4) Two fresh 1. 5V AA batteries (for the temperature clock). Two fresh 1. 5V AA batteries (for the remote temperature transmitter). Appropriate screwdriver for screws. ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Technology--Time and Frequency Division) WWVB radio station is located in Ft. [. . . ] 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash). 2) Press and release the "SET" button 5 times until the default year "00" flashes in the date LCD. 3) Press and release the "+" button to select the year. 4) Press and release the "SET" button to confirm the year, and to set the month. 5) The default month "1" will flash. 6) Press and release the "+" button to select the appropriate month. 7) Press and release the "SET" button to confirm the month and to set the date. 8) The default date "1" will flash. 9) Press and release the "+" button to select the appropriate date. 10) Press and release the "SET" button to confirm the date and to set the weekday. 11) The default weekday "MON" (depends on selected language) will flash. 12) Press and release the "+" button to select the appropriate weekday. 13) Press and release the "SET" button to confirm the calendar settings and to advance to select either 12 or 24-hour time display. G) 12/24-HOUR SETTING Note: 12-hour uses AM/PM, 24-hour is also known as "military" time. 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash). 2) Press and release the "SET" button 9 times until the "12" hour time display flashes in the time LCD. 3) Press and release the "+" button to toggle between 12 and 24 hour time. 4) Press and release the "SET" button to confirm the 12/24-hour time display and to advance to select either °F or °C. 7 H) SELECTING °F OR °C 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash). 2) Press and release the "SET" button 10 times until the default "°F" flashes in the time LCD. 3) Press and release the "+" button to toggle between °F and °C. 4) Press and release the "SET" button to confirm the °F or °C selection and exit the program mode. III) FEATURES & OPERATIONS A) CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE) There are three possible display modes to view the day, seconds, and temperature. [. . . ] 5) If problems persist contact La Crosse Technology. Hour is incorrect (minute and date are correct). Problem: Be sure correct time zone and daylight saving time are selected. Solution: "--. -" appears in outdoor temperature LCD Problem: 1) Check batteries in the remote temperature sensor. [. . . ]