User manual LA CROSSE TECHNOLOGY WS-8035TWC

[. . . ] WS-8035 Wireless 433 MHz Wireless Weather Station Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/ Additional Equipment About WWVB Quick Set Up Guide Detailed Set Up Guide Battery Installation Start Up Sequence Explanation of LCD Information Function Key Layout Program Mode Overview of Programming Sequence LCD Contrast Setting Time Zone Setting DST ON/OFF Setting Radio-controlled Time ON/OFF Setting 12/24-hour Time Mode Setting Setting the Time/Date Manually Temperature Measuring Units (ºF/ºC) Air Pressure Measuring Units (inHg/hPa) Relative Pressure Setting Forecast Sensitivity Setting Features and Operation Time Alarm Setting and Operation Moon Phase Minimum/Maximum Temperature/Humidity Multiple Remote Temperature/Humidity Sensors Comfort Icon Weather Forecast and Pressure Trend Indicators Weather Icons Weather Tendency Arrows Barometric Air Pressure Reading Air Pressure History Bar Chart Mounting Maintenance and Care Troubleshooting Guide Specifications Warranty Information Page 3 3 4 5 6 7 8 8 8 8-9 9 9 9-10 10-11 11 11 11-12 12 13 14 14-15 15-16 16 16 17 17 18 18 19-20 21 22 23 24-25 2 INVENTORY OF CONTENTS 1. TX4U--remote thermo/hygro (temperature/humidity) sensor 3. Instruction manual and warranty card ADDITIONAL EQUIPMENT (not included) 1. One wall-mounting screw (optional) ABOUT WWVB (radio-controlled time) The NIST (National Institute of Standards and Technology--Time and Frequency Division) radio station, WWVB, is located in Ft. [. . . ] When the alarm time and alarm icon are showing to the right of the moon phase the alarm is activated. When the day and date are showing in the DATE LCD the alarm is deactivated. While the alarm is sounding press and release the SNOOZE/CH button. The snooze will be activated for 10 minutes. The alarm will come back on after 10 minutes. To deactivate the snooze function press and release any button other than either of the SNOOZE/CH buttons. 3. 13 B. There are 12 moon phases shown on the indoor weather station; the white portion signifies the portion of the moon visible in the sky. Thus, when the moon icon is all white, it is a full moon. The indoor weather station is programmed with all moon phases from the year 2003 until 2029. New Moon Full Moon Small Waxing Crescent Large Waning Gibbous Large Waxing Crescent Small Waning Gibbous First Quarter Small Waxing Gibbous Last Quarter Large Waning Crescent Large Waxing Gibbous Small Waning Crescent C. Minimum and Maximum Temperature and Humidity 1. Indoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum indoor temperature and humidity. The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset. From the normal display mode, press and release the "IN" key once to view the indoor maximum temperature and humidity ("MAX" will be displayed above the indoor temperature and humidity). Press and release the "IN" key again to view the indoor minimum temperature and humidity. Press and release the "IN" key again to return to the normal mode (timeout of viewing minimum/maximum values will occur if no keys are pressed for fifteen seconds). b. c. Note: To reset the indoor minimum and maximum temperature and humidity, first display the values you wish to reset (minimum or maximum). Next press and hold the "SET" key for at least three seconds. You will see then that the values will reset to the current temperature and humidity and corresponding time. 14 2. Outdoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum outdoor temperature and humidity. The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset. From the normal display mode, press and release the "OUT/+" key once to view the outdoor maximum temperature and humidity ("MAX" will be displayed above the outdoor temperature and humidity). Press and release the "OUT/+" key again to view the outdoor minimum temperature and humidity. Press and release the "OUT/+" key again to return to the normal mode (timeout of viewing minimum/maximum values will occur if no keys are pressed for fifteen seconds). [. . . ] La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. [. . . ]