User manual LA CROSSE TECHNOLOGY WS-8055U

[. . . ] This Moon Phase Alarm is regulated by the WWVB transmitter. QUICK SET-UP GUIDE 1) Insert two AA batteries into the Moon Phase Alarm Clock. 3) If there is no WWVB reception, manually set the time and date (instructions in the Program Mode). 5) Place the WS-8055U in a suitable location, where WWVB signals can be received. 3 DETAILED SET-UP GUIDE I) BATTERY INSTALLATION Note: To avoid start-up problems make sure that the batteries do not spring free. A) MOON PHASE CLOCK 1) Remove the battery cover, located on the backside of the unit. [. . . ] 2) Press the "+" button to select the year. 3) Press the "SET" button to confirm the year, and to set the month. 4) The default month "1" will flash. Press the "+" button to select the appropriate month. 5) Press the "SET" button to confirm the month, and to set the date. 6) The default date "1" will flash. Press the "+" button to select the appropriate date. 7) Press the "SET" button to confirm the date, and to set the weekday. 8) The default weekday "MON" (depends on selected language) will flash. Press the "+" button to select the appropriate weekday. 9) Press the "SET" button to confirm the calendar settings, and to advance to select either 12 or 24-hour time display. VII) 12/24-HOUR SETTING 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 9 more times, until the "12" hour time display flashes in the time LCD. 2) Press the "+" button to toggle between 12 and 24 hour time. 3) Press the "SET" button to confirm the 12/24-hour time display, and to advance to select either °F or °C. VIII) SELECTING °F OR °C 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 10 more times, until the default "°F" flashes in the time LCD. 2) Press the "+" button to toggle between °F and °C. 3) Press the "SET" button to confirm the °F or °C selection, and exit the Program Mode. 7 FEATURES & OPERATIONS I) CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE) There are three possible display modes to view the day, seconds, and temperature. The month&date/weekday/moon phase/indoor temperature is the default. To change the display: WWVB Tower Alarm sound Indoor Moon Phase Icon Month/Date 1) Press the "+" button. The Weekday display should now show the month&date/weekday/moon phase/seconds. 2) Press the "+" button a second time and the display will now show the month&date/seconds/moon phase/indoor temperature. 3) Press the "+" button a third time and the display will return to the normal display. II) THE ALARM A) SETTING THE ALARM Note: The duration of the alarm is 85 seconds. [. . . ] Hour is incorrect (minute and date are correct). OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 2. THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. [. . . ]