User manual LA CROSSE TECHNOLOGY WS-8147U-IT

[. . . ] WS-8147U-IT RADIO-CONTROLLED CLOCK WITH OUTDOOR WIRELESS TEMPERATURE AND MOON PHASE INSTRUCTION MANUAL TABLE OF CONTENTS Topic Features Battery Installation Setup Atomic time - WWVB Radio Controlled Time Function keys LCD Screen Manual Settings Changing the display mode Alarm setting Moon phases Outdoor transmitter 915 MHz Reception Positioning and Mounting Care and maintenance Specifications Warranty Page 3 4 5 5 6 7 7 10 11 12 13 13 14 16 17 18 Contents Language Page __________________________________________________________________ English French Spanish 1 This product offers: INSTANT TRANSMISSION is the state-of-theart new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variations in real-time! 1 2 FEATURES: RADIO-CONTROLLED CLOCK: Hanging holes LCD1 display LCD2 display OUTDOOR TEMPERATURE TRANSMITTER: Remote transmission of outdoor temperature to the radio-controlled clock at 915 MHz Wall mounting case Function keys Holder Battery cover Foldable stand ALKALINE BATTERIES ARE RECOMMENDED FOR USE IN BOTH UNITS. AVOID USING RECHARGEABLE BATTERIES. WWVB Radio controlled time with manual time setting Time display: hour, minute, second 12/24h time display Alarm (with snooze) Calendar display (month, day, weekday, year) Time zone Daylight savings time ON/OFF option (DST) Indoor and outdoor temperature display Temperature display in ºF/ ºC Moon phase display Indoor humidity display in RH% Wireless transmission at 915MHz Signal reception intervals at 4 seconds Low battery indicator Wall mount or freestanding TO INSTALL OR REPLACE BATTERIES IN TEMPERATURE TRANSMITTER (INSTALL BATTERIES IN TRANSMITTER BEFORE INSTALLING BATTERIES IN RADIOCONTROLLED CLOCK) The transmitter uses 2 x AA, 1. 5V batteries. To install and replace the batteries, please follow the steps below: 1. [. . . ] Press and release the SET key to move to the mode "Date Setting". DATE 1. The digits for the date will start flashing on LCD2 (Default setting 1). Set the desired date by use of the + key. Note: The date can only be set in conjunction with the selected month. For example, it is not possible to set the date 30 if the month of February is selected. Press and release the SET key to move to "Weekday setting". The weekday symbols will be displayed on LCD2 in the pre-set language and flashing. Set the desired weekday by use of the + key. Press and release the SET key to enter the mode "º12/24 hour Time Display Setting". The "12h" or "24h" will start flashing in LCD1 (Default setting 12h). Select the desired time display mode by use of the + key. Press and release the SET key to enter the "ºC/ºF Temperature Setting". The characters "°F" or "°C" will start flashing on LCD2 (Default setting °F). By use of the + key select "°C" for temperature display in degrees Celsius or "°F" for degrees Fahrenheit. Press and release the SET key to exit the setting mode and switch back to the normal display mode. EXIT THE MANUAL SET MODE To return to the normal display mode from anywhere in manual setting mode simply press the SNZ key anytime. The radio-controlled clock will update the temperature display every 4 seconds. The range of the outdoor temperature transmitter may be affected by the temperature. At cold temperatures the transmitting distance may be decreased. Please bear this in mind when positioning the transmitter. Also the batteries may be reduced in power during periods of extreme cold temperatures. POSITIONING Before permanently mounting, ensure that the radio-controlled clock is able to receive WWVB signals from the desired location. Also, extreme and sudden changes in temperature will decrease the accuracy of the radio-controlled clock, and changes in elevation will result with inaccurate temperatures readings for the next 12 to 24 hours. These changes will require a 12 to 24 hour wait before obtaining reliable data. [. . . ] This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. [. . . ]