User manual LA CROSSE TECHNOLOGY WS-8268U-IT

[. . . ] ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE AND MOON PHASE Instruction Manual This product offers: INSTANT TRANSMISSION is the state-of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variations in real-time! Alarm setting with snooze function Calendar display Weekday display (4 languages to choose from: English, French, Spanish, and German) Time zone setting Daylight savings time ON/OFF option (DST) ºF or ºC temperature display selectable Indoor temperature display Outdoor temperature display via 915MHz transmission Wall mount or freestanding Current moon phase display Low battery indicator OUTDOOR TEMPERATURE SENSOR: FEATURES: ATOMIC CLOCK: Hanging holes Remote transmission of outdoor temperature to the atomic clock by 915 MHz signals Wall mounting case LCD1 display LCD2 display LCD3 display Function keys Holder TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE SENSOR Foldable stand Battery cover WWVB Radio controlled time with manual time setting 12/24 hour time display Time display: hour, minute, second optional The sensor uses 2 x AA, 1. 5V batteries. To install and replace the batteries, please follow the steps below: 1. Insert the batteries, observing the correct polarity (see marking inside battery compartment). [. . . ] Press and release the SET key to exit the setting mode and switch back to the normal display mode. To return to the normal display mode from anywhere in manual setting mode simply press the SNZ key anytime. If no keys are pressed for at least 15 seconds in setting mode, the atomic clock will automatically switch back to normal display mode. The snooze can only be activated during alarm time for a snooze duration of 10 minutes by pressing the SNZ key on the back of the clock OUTDOOR TEMPERATURE SENSOR: The temperature is measured and transmitted to the atomic clock every 4 seconds. The atomic clock will update the outdoor temperature display every 4 seconds. The range of the outdoor temperature sensor may be affected by the temperature. At cold temperatures the transmitting distance may be decreased. Please bear this in mind when positioning the sensor. Also the batteries may be reduced in power during periods of extreme cold temperatures. EXIT THE MANUAL SETTING MODES 9 10 915MHz RECEPTION CHECK FOR OUTDOOR TEMPERATURE SENSOR The atomic clock will receive the temperature data within 3 minutes. If the temperature data is not being received 3 minutes after setting up (the display shows "- - -"), then please check the following points: 1. The distance of the atomic clock or outdoor temperature sensor should be at least 6 feet (2 meters) away from any interfering sources such as computer monitors or TV sets. Avoid placing the receiver onto or in the immediate proximity of metal window frames. Using other electrical products such as headphones or speakers operating on the same signal frequency (915MHz) may prevent correct signal transmission and reception. Neighbors using electrical devices operating on the 915MHz signal frequency can also cause interference. Note: When the 915 MHz signal is received correctly, do not re-open the battery cover of either the outdoor temperature sensor or atomic clock, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally then reset all units (see Setting up above) otherwise transmission problems may occur. The maximum transmission range is 330 feet from the outdoor temperature sensor to the atomic clock (in open space). However, this depends on the surrounding environment and interference levels. The weekday/month&date//indoor temperature/outdoor temperature is the default. The display should now show the weekday/month&date/seconds/outdoor temperature. Press the + key a second time and the display will show the weekday/month&date/indoor temperature/seconds. Press the + key a third time and the display will show the seconds/month&date/indoor temperature/outdoor temperature. [. . . ] If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions contained in your owner's manual; (5) damage resulting from the performance of repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference. This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. [. . . ]