User manual LA CROSSE TECHNOLOGY WS-9060U-IT

[. . . ] This is due to a random security code assigned by the transmitter at start-up. This code must be received and stored by the weather station in the first 3 minutes of power being supplied to the transmitter. 1 2 TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION The weather station uses 2 x AAA, IEC LR3, 1. 5V batteries. To install and replace the batteries, please follow the steps below: 1. Insert finger or other solid object in the space at the bottom center of the battery compartment and lift up to remove the cover. [. . . ] The icons displayed forecasts the weather in terms of getting better or worse and not necessarily sunny or rainy as each icon indicates. For example, if the current weather is cloudy and the rainy icon is displayed, it does not mean that the product is faulty because it is not raining. It simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rainy. Note: After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. This will allow sufficient time for the Weather station to collect air pressure data at a constant altitude and therefore result in a more accurate forecast. Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather forecasting feature is estimated to have an accuracy level of about 75% due to the varying areas the Weather station has been designed for use. In areas that experience sudden changes in weather (for example from sunny to rain), the Weather station will be more accurate compared to use in areas where the weather is stagnant most of the time (for example mostly sunny). TO EXIT THE MANUAL SETTING MODE To exit the manual setting mode anytime during the manual setting, wait for automatic timeout. The mode will return to normal time display. MOON PHASES SYMBOL The moon icon of the weather station will also display all 8 moon phases throughout the year according to the set calendar. A bar segment above the moon phase will indicate current moon phase. Bar segment (moon phase indicator) Waxing Full Waning Last Waning New Waxing First Crescent Quarter Gibbous Moon Gibbous Quarter Crescent Moon 7 8 If the weather station is moved to another location significantly higher or lower than its initial standing point (for example from the ground floor to the upper floors of a house), discard the weather forecast for the next 12-24 hours. By doing this, the Weather Station will not mistake the new location as being a possible change in airpressure when really it is due to the slight change of altitude. Outdoor temperature in ºC/ºF Outdoor data signal reception indicator Low battery indicator (transmitter) Outdoor relative humidity in RH% WEATHER TENDENCY INDICATOR Working together with the weather icons is the weather tendency indicators (located on the left and right sides of the weather icons). When the indicator points upwards, it means that the air-pressure is increasing and the weather is expected to improve, but when indicator points downwards, the air-pressure is dropping and the weather is expected to become worse. Taking this into account, one can see how the weather has changed and is expected to change. For example, if the indicator is pointing downwards together with cloud and sun icons, then the last noticeable change in the weather was when it was sunny (the sun icon only). Therefore, the next change in the weather will be cloud with rain icons since the indicator is pointing downwards. Note: Once the weather tendency indicator has registered a change in air pressure, it will remain permanently visualized on the LCD. TOGGLING AND RESETTING THE MIN/MAX DATA VIEW THE MIN/MAX DATA Press the MIN/MAX key several times to view the MIN/MAX indoor temperature, and MIN/MAX outdoor temperature sequentially. RESET THE MIN/MAX DATA Press and hold MIN/MAX key for 3 seconds to reset all the indoor and outdoor temperature to current temperatures. LOW BATTERY INDICATOR Low battery indicator is displayed on the LCD by the time when the batteries require changing in the display. The low battery indicator is displayed in the outdoor temperature area when the batteries in the transmitter require changing. ABOUT THE THERMO-HYGRO TRANSMITTER The temperature may affect the range of the thermo-hygro transmitter. At cold temperatures the transmitting distance may be decreased. Please bear this in mind when positioning the transmitters. Also the batteries may be reduced in power for the thermo-hygro transmitter. INDOOR TEMPERATURE/HUMIDITY DATA The indoor temperature and humidity data are automatically updated and displayed on the fourth section of the LCD. Indoor temperature in ºC/ºF Indoor relative humidity in RH% CHECKING FOR 915MHz RECEPTION If the outdoor temperature and humidity data are not being received within two minutes after set up (or outdoor display always show "- -. -" in the outdoor section of the Weather station during normal operation), please check the following points: 1. Secure the bracket onto a desired wall using the screws and plastic anchors. Note: Before permanently fixing the thermo-hygro to the wall base, pace all units in the desired locations to check that the outdoor temperature and humidity readings are receivable. [. . . ] Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Statement according to FCC part 15. 21: Modifications not expressly approved by this company could void the user's authority to operate the equipment. Statement according to FCC part 15. 105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]