User manual LA CROSSE TECHNOLOGY WS6158

[. . . ] WEATHER WALL CLOCK Instruction Manual FEATURES: WEATHER WALL CLOCK: LCD1 display LCD2 display Hanging holes TO INSTALL AND REPLACE BATTERIES IN THE WEATHER WALL CLOCK The weather wall clock uses 2 x AA, IEC LR6, 1. 5V batteries. To install and replace the batteries, please follow the steps below: 1. Insert finger or other solid object in the space at the bottom center of the battery compartment and lift up to remove the cover. Insert batteries observing the correct polarity (see marking inside battery compartment). [. . . ] The range runs from 0 to -12 and then runs from 12 back to 0 in consecutive 1-hour interval. Press and release the SET key to enter the "Language Setting". 2. 1. WEEKDAY SETTING 2. LANGUAGE SETTING The weekdays can be displayed in LCD2 with the pre-set languages: German, US English, French, and Spanish. Set the desired language for the weekday display in LCD 2 by use of the + key. Press and release the SET key to enter the mode "Manual Time Setting". 12/24 HOURS TIME DISPLAY SETTING 1. The "12h" or "24h" will start flashing in LCD1 (Default setting 24h). Select the desired time display mode by use of the + key. Press and release the SET key to enter the "ºC/ºF Temperature Setting". SNOOZE SETTING The snooze can only be activated during alarm time for a snooze duration of 10 minutes by pressing the SNZ key on the back of the clock THE WEATHER FORECASTING ICONS: There are 3 weather icons on the middle section of LCD 2, which can be displayed in any of the following combinations: °C OR °F TEMPERATURE SETTING 1. The characters "°C" or "°F" will start flashing on LCD1 (Default setting °C). By use of the + key select "°C" for temperature display in degrees Celsius or "°F" for degrees Fahrenheit. Press and release the SET key to exit the setting mode and switch back to the normal display mode. To return to the normal display mode from anywhere in manual setting mode simply press the SNZ key anytime. If no keys are pressed for about 15 seconds in setting mode, the weather wall clock will automatically switch back to normal display mode. EXIT THE MANUAL SETTING MODES · · SUNNY CLOUDY WITH SUNNY INTERVALS RAINY ALARM SETTING To enter into the alarm setting mode: 1. Press and release the ALM key to set the minutes. Press and release the + key to set the minutes. If the + key is held, the unit will increase by 5. Press and release again the ALM key to exit the Alarm setting mode or wait for 15 seconds automatic timeout or press the SNZ key. For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. If the icons do not change, then it means either the air pressure has not changed or the change has been too slow for the Weather Station to register. However, if the icons displayed is a sun or raining cloud, there will be no change of icon if the weather gets any better (with sunny icon) or worse (with rainy icon) since the icons are already at their extremes. The icons displayed forecasts the weather in to terms of getting better or worse and not necessarily sunny or rainy as each icon indicates. For example, if the current weather is cloudy and the rainy icon is displayed, it does not mean that the product is faulty because it is not raining. It simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rain. [. . . ] If for example the unit is att/ached to a piece of metal, it may then either reduce or increase the transmitting range. For this reason, we recommend not placing the unit on any metal surfaces or in any position where a large metal or highly polished surface is in the immediate proximity (garage doors, double glazing, etc. ). Before securing in place, please ensure that the Weather station can receive the 433MHz signal from the Temperature transmitter at the positions that you wish to situate them. The Outdoor Transmitter simply clicks in or out of the holder. [. . . ]