User manual LA CROSSE TECHNOLOGY WS8167

[. . . ] 868MHZ WEATHER WALL CLOCK Instruction Manual « Instant Transmission+» is the up and coming state-of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. "IT +" offers you an immediate update of all your outdoor data measured from the transmitters: follow your climatic variations in real-time! FEATURES: WEATHER WALL CLOCK: Hanging holes LCD1 display LCD2 display LCD3 display Function keys Battery cover Foldable stand · · · · · · DCF-77 Radio controlled time with manual setting option Time display: hour, minute, second Alarm setting with snooze function Calendar display Weekday display (3 languages to choose from: German, English, and French) Weather forecasting with 3 weather icons 17 · · · · · · · Weather tendency indicator Time zone setting ºC or ºF temperature display selectable Indoor temperature display Wireless transmission at 868 MHz Signal reception intervals at 4 seconds Wall mount or freestanding TEMPERATURE TRANSMITTER: · · · Remote transmission of outdoor temperature to weather station by 868 MHz signal Wall mounting case Mounting at a sheltered place. Avoid direct rain and sunshine TO INSTALL AND REPLACE BATTERIES IN THE WEATHER WALL CLOCK The weather wall clock uses 2 x AA, IEC LR6, 1. 5V batteries. To install and replace the batteries, please follow the steps below: 1. [. . . ] 2. The month digits on LCD2 will start flashing (Default setting 1). Set the desired month by use of the + key. Press and release the SET key to move to the mode "Date Setting". DAY SETTING Flashing 1. The digits for the day will start flashing on LCD1 (Default setting 1). Set the desired day by use of the + key. 23 2. Note: The data can only be set in conjunction with the selected month. For example, it is not possible to set the data 30 if the months of February is selected. Press and release the SET key to exit the setting mode and switch back to the normal display mode. WEEKDAY SETTING Flashing 1. 2. The weekday will start flashing in LCD1. Select the desired weekday display by use of the + key. Press and release the SET key to enter the "ºC/ºF Temperature Setting". °C OR °F TEMPERATURE SETTING Flashing 1. · · The characters "°C" or "°F" will start flashing on LCD1 (Default setting °C). By use of the + key select "°C" for temperature display in degrees Celsius or "°F" for degrees Fahrenheit. Press and release the SET key to enter the mode "Manual Time Setting". To return to the normal display mode from anywhere in manual setting mode simply press the SNZ key anytime. If no keys are pressed for about 15 seconds in setting mode, the weather wall clock will automatically switch back to normal display mode. EXIT THE MANUAL SETTING MODES ALARM SETTING To enter into the alarm setting mode: 1. Press and release the ALM key to set the minutes. Press and release the + key to set the minutes. If the + key is held, the unit will increase by 5. Press and release again the ALM key to exit the Alarm setting mode or wait for 15 seconds automatic timeout. 24 TO DEACTIVATE THE ALARM: Alarm icon (((·))) (ON) The alarm will be automatically ON when the alarm time is set. To deactivate the alarm (OFF), press and release once the ALM key in normal mode display. The alarm icon will disappear, the alarm is now off. SNOOZE SETTING The snooze can only be activated during alarm time for a snooze duration of 10 minutes by pressing the SNZ key on the back of the clock THE WEATHER FORECASTING ICONS: There are 3 weather icons on the middle section of LCD3, which can be displayed in any of the following combinations: SUNNY CLOUDY WITH SUNNY INTERVALS RAINY For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. If the icons do not change, then it means either the air pressure has not changed or the change has been too slow for the Weather Station to register. When the indicator points upwards, it means that the airpressure is increasing and the weather is expected to improve, but when indicator points downwards, the air-pressure is dropping and the weather is expected to become worse. [. . . ] Injuries, burns, or property damage may be resulted if the batteries are in contact with conducting materials, heat, corrosive materials or explosives. The batteries shall be taken out from the unit before the product is to be stored for a long period of time. Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended type. 29 · · · · · · When cleaning the display and casings, use a soft damp cloth only. [. . . ]