User manual LA CROSSE TECHNOLOGY WS8615

[. . . ] WIRELESS 433 MHz TEMPERATURE STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this revolutionary 433MHz temperature Station which provides advanced data-logging and data-analysis functions for up to three outdoor temperature readings. The temperature station is connectable to PC by the COM port and data importing to PC is allowed. By applying the smart software provided, user may perform data analysis and statistics conveniently in PC. With easy to use keys, this innovative product is ideal for home and professional usages. FEATURES: The Temperature Station Hanging Hole LCD screen Battery Compartment Function keys Cable socket (to PC) Foldout stand 1 · · · · · · · · · · · · · · · · DCF radio controlled time with manual setting option Time zone option ±12 hours Indoor and outdoor temperature display with MIN/MAX records and time of reception Indoor and outdoor humidity display as RH% with MIN/MAX records Data logging function ­ can store up to 3000 sets of Temperature/Humidity data Connectable to PC (Com port) ­ data can be transferred to PC with the software (in CD ROM) provided Can receive up to 3 outdoor transmitters Time reception ON/OFF selectable Dew point temperature displayed Temperature & humidity High/Low alarm function 12/24 hour time display Year/ Month/ Day calendar display Temperature display in ºC/ ºF LCD contrast selectable Low battery indicator Table standing or wall mounting The Outdoor Temperature Transmitter · · · · Remote transmission of outdoor temperature and humidity to Temperature Station by 433 MHz Shower proof casing Wall mounting case Mounting at a sheltered place. [. . . ] For instant, user may apply 3 transmitters but set to save the data only from particular 2 transmitters. To set the number of transmitters whose data are to be saved in the system memory: 1. Press and hold the SET key until the digits "Lcd" starts flashing. Press and release the SET key twelve times to enter transmitter number setting. The digit "Enr" will be flashing. Use the Plus and Minus key to select the number of transmitter to be used with the temperature station (up to 3 transmitters) 4. Press the SET key one more time to confirm and go back to the normal display mode. Note: · If user has set "Enr = 2" and three transmitters are on, the data only from channel No. 1 and 2 will be saved in the system memory. 19 · · On the other hand, if user has initially applied 3 transmitters but then remove the Channel 2, the temperature station will thereafter display "--. -" for Channel 2. And if the user has chosen "Enr = 2, then data from Channel 1 to 2 will be stored in the memory, instead of Channel 1 and 3. The data stored in the memory for Channel 2 will be "--. -". After the "Enr" number has been changed, the history data will be cleared and "mem" will be reset to "0000". TO EXIT THE MANUAL SETTING MODE Press the Mode key or Alarm key to exit the manual setting mode anytime during the manual setting. The mode will return to the normal time display. TOGGLING BETWEEN DIFFERENT CHANNELS (INDOOR AND OUTDOOR CHANNELS): 1. Press the Plus or Minus key to toggle between the Temperature and humidity readings of the indoor channel and the outdoor transmitter channel(s). The channel identification icon ("in", "out 1", "out 2", "out 3") will be displayed at the upper right screen indicating that the particular channel is now being selected. The temperature and humidity readings of Outdoor transmitter No. 1 is now shown 20 VIEWING VARIOUS TYPE OF TEMP/HUMDITY READINGS OF A SELECTED CHANNEL: After a particular channel (the indoor sensor or one of the outdoor transmitters) has been selected by pressing the Plus or Minus key, the following modes of data may be viewed by user: a. The Max temperature and Max humidity Max icon flashing In normal display mode, press the mode key once. The maximum temperature and maximum humidity measured by the channel, and the date and time of the maximum temperature recorded will be displayed. The "max" icon will be flashing. 21 b. The Min temperature and Min humidity Min icon flashing In normal display mode, press the mode key two times. The minimum temperature and humidity measured by the channel, and the date and time of the minimum temperature recorded will be displayed. The "min" icon will be flashing. 22 c. The average value of the last 100 sets reading Average icon flashing In normal display mode, press the mode key three times. The average temperature and humidity value of the data which have been saved in the system memory will be displayed. The "avg" icon will be flashing. [. . . ] Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended type. Do not make any repair attempts to the units. Return it to their original point of purchase for repair by a qualified engineer. [. . . ]