User manual LA CROSSE TECHNOLOGY WS-9057

[. . . ] WEATHER STATION Instruction Manual « Instant Transmission+» is the up and coming state-of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. "IT +" offers you an immediate update of all your outdoor data measured from the transmitters: follow your climatic variations in real-time! INTRODUCTION: Congratulations on purchasing this state-of-the-art weather station as an example of innovative design and quality piece of engineering. Providing radio controlled time, date, calendar, Moon phase, indoor and outdoor temperature, indoor and outdoor relative humidity, and air pressure history information. This unit will never keep you guessing on current and future weather conditions. [. . . ] 3. The current relative pressure value will start flashing Use the OUT/+ key to increment and IN key to decrement the value. Keep holding the key allows the value to advance faster. Confirm with the SET key and enter the Weather forecast icon sensitivity setting. WEATHER FORECASTING ICON SENSITIVITY SETTING: For locations with rapid changes of weather conditions, the weather icons sensitivity can be set to a different level for faster display of weather conditions. Flashing 1. 2. 3. The current sensitivity value will start flashing. Use the OUT/+ key to set the weather sensitivity level. There are 3 levels of setting: 2, 3 and 4. The value corresponds to the change of air pressure in hPa before the weather icon will switch to another state. Level 2 is the most sensitive setting, level 4 is the slowest recording setting (default setting is "3"). Confirm with the SET key and exit the Manual settings. TO EXIT THE MANUAL SETTING MODE To exit the manual setting mode anytime during the manual setting, press the SNOOZE/CH key or wait for automatic timeout. The mode will return to normal time display. ALARM SETTING: Alarm icons Alarm time The alarm time can be set when pressing the ALM/DATE key. Press and hold the ALM/DATE key to enter the alarm set mode. Use the IN key to set the alarm hour. 26 3. 4. Use the OUT/+ key to set the alarm minute. Confirm with SNOOZE/CH key and exit the Alarm setting. The icon (()) will be displayed along with the set alarm time. Note: If the calendar is displayed in the Weather station, the alarm is NOT active. To view and active the alarm, press the ALM/DATE key. The alarm icon and the alarm time will be displayed, indicating that the alarm setting is activated. The maximum alarm ring duration is 2 minutes. SNOOZE SETTING AND STOPPING THE ALARM: 10 minutes snooze function can be set when the alarm is ringing by pressing the SNOOZE/CH key. When the alarm is snoozing, the alarm icon ((·)) will remain flashing indicating that the alarm is active but is in Snooze mode. To stop the snooze function when it is in snooze period, press any key except the SNOOZE/CH key. To stop the alarm, press any key during alarm ringing, except the SNOOZE/CH key. MOON PHASES SYMBOL The Moon icon of the Weather station will also display all 12 Moon phases throughout the year according to the set calendar. New Moon Small Waxing Crescent Large Waxing First Quarter Crescent Small Waxing Large Waxing Gibbous Gibbous Small Waning Crescent Large Waning Crescent Last Quarter Small Waning Gibbous Large Waning Gibbous Full Moon INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE: The indoor temperature and humidity data, the indoor comfort indicator are automatically updated and displayed on the second section of the LCD. MAX icon Indoor temperature in ° or ºF C Indoor relative humidity in RH% THE COMFORT LEVEL INDICATOR: Comfortable : Uncomfortable : A happy face icon "" indicating a temperature level between 20° and 2 5. 9°C and relative humidity reading C between 45% and 65%. [. . . ] The Transmitter can also be position on a flat surface by securing the stand to the bottom of the Transmitter. To wall mount: 1. Secure the bracket onto a desired wall using the screws and plastic anchors. Clip the remote thermo-hygro transmitter onto the bracket. Note: Before permanently fixing the transmitter wall base, place all units in the desired locations to check that the outdoor temperature reading is receivable. [. . . ]