User manual LA CROSSE TECHNOLOGY WS9135

[. . . ] WIRELESS 868 MHz WEATHER STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this Weather Station with wireless 868 MHz transmission of outdoor temperature and display of indoor temperature, weather forecast icons and weather tendency indicators. It is further featuring a DCF-77 radio controlled clock and alarm function. With four easy to use function keys, this innovative product is ideal for use in the home or office. « Instant Transmission+» is the up and coming state-of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. "IT +" offers you an immediate update of all your outdoor data measured from the transmitters: follow your climatic variations in real-time! 29 FEATURES: The Weather station Hanging hole Function keys Battery compartment cover Foldout stand LCD Display · · · · · · · · · · · · · DCF-77 Radio controlled time function with manual time setting options DCF time reception ON/OFF 24 hour display Alarm function with snooze Time zone +/- 12 hours Temperature display in degree Celsius (° C) Indoor and outdor temperature with MIN/MAX records Manual reset of MIN/MAX records 3 weather forecast with weather tendency indicator Wireless transmission at 868 MHz Signal reception intervals at 4 seconds Low battery indicator Wall mounting or table standing (foldout stand) 30 The Outdoor Temperature Transmitter · Remote transmission of outdoor temperature to Weather station by 868 MHz signals · Shower proof casing · Wall mounting and table-standing SETTING UP: Note: This weather station receives only one outdoor transmitter. [. . . ] When the signal is received, the manually set time will automatically be replaced by the received time. During reception attempts, the DCF tower icon will flash. If reception has been unsuccessful, the DCF tower icon will not appear but reception will still be attempted. ALARM SETTING Alarm time Alarm icon (ON) 37 To set alarm: 1. Press and hold ALARM for about 3 seconds until the alarm time display flashes. The hour digit and the alarm icon will be flashing. Press ALARM button once and minute digit will be flashing. User shall then press + button to set the minute. Press ALARM button once to confirm the setting. To activate/ deactivate the alarm function, press the ALARM button once. The display of the alarm icon represents that the alarm is "ON". Note: The duration of alarm sounding is 85 seconds TO ACTIVATE THE SNOOZE FUNCTION AND STOPPING THE ALARM: 1. When the alarm is sounding, press the MIN/MAX RESET key to activate the snooze function. The alarm will stop and re-activate after the snooze interval of 10 minutes. To stop the alarm completely, press any keys other than the MIN/MAX RESET key. WEATHER FORECAST AND TENDENCY THE WEATHER FORECASTING ICONS : There are 3 weather icons in the second section of LCD which can be displayed in any of the following combinations : Sunny Cloudy with sunny intervals Rainy 38 For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. If the icons do not change, then it means either the air pressure has not changed or the change has been too slow for the Weather station to register. However, if the icon displayed is a sun or raining cloud, there will be no change of icon if the weather gets any better (with sunny icon) or worse (with rainy icon) since the icons are already at their extremes. The icons display weather forecasts in terms of getting better or worse, and not necessarily sunny or rainy as each icon indicates. For example, if the current weather is cloudy and the rainy icon is displayed, it does not mean that the product is faulty because it is not raining. It simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rainy. Note : After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. [. . . ] The batteries shall be taken out from the unit before the product is to be stored for a long period of time. · Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended type. · When cleaning the display and casings, use a soft damp cloth only. [. . . ]