User manual LA CROSSE TECHNOLOGY WS9228

[. . . ] WIRELESS 433 MHz WEATHER STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this fancy Weather Station with wireless 433MHz transmission of outdoor temperature and humidity and display of indoor temperature and humidity. It is further featuring a DCF77 radio controlled clock with date display and two alarms. With eight easy to use function keys, this innovative product is ideal for use in the home or office. FEATURES: The Weather Station LCD Display Hanging Hole Battery compartment cover Function Keys Detachable stand · · · · · · · DCF-77 Radio controlled time with manual setting options Time reception ON/OFF 12/24 hour display Hour and minute display, seconds indicated by flashing dot Time zone option ±12 hours Features 2 alarms with snooze function Snooze setting 25 · · · · · · · · · · · · · · Date and month / weekday and date calendar display selectable Weather forecasting with 3 weather icons and weather tendency indicator Weather forecasting icon sensitivity setting Temperature display in degrees Celsius (°C) or Fahrenheit (°F) selectable Indoor and outdoor temperature display with MIN/MAX recording Indoor and outdoor humidity reading displayed as RH% with MIN/MAX recordings All MIN/MAX temperature recordings show date and time received All MIN/MAX recordings can be reset Indoor comfort level indicator - happy or sad face icons Can take up to three outdoor transmitters LCD contrast setting Low battery indicator Wall mounting or table standing LED backlight · The Outdoor Thermo-Hygro Transmitter Remote transmission of outdoor temperature and humidity to weather station by 433 MHz signals Shower proof casing Wall mounting stand · · SETTING UP : 1. First, insert the batteries into the Weather Station (see "How to install and replace batteries in the Weather Station" below). [. . . ] Month. " (for 24h time display) "Month. Date. " (for 12h time display) The date default of the Weather station is 1. Once the radio-controlled time signal is received, the date is automatically updated. However, if the signal is not received, the date can also be set manually. Using the IN key, set the year required. The range runs from 2003 to 2039 (default is 2003). Press the SET key to enter the month and date setting mode. Press the IN (or OUT) key to set the date and the OUT (or IN) key to set the month required. Confirm with the SET key and enter the "Snooze setting " or exit the setting mode by pressing the CH or SNOOZE key. SNOOZE SETTING: Snooze time The snooze time can be set OFF to a maximum time of 30 minutes (default is 10 minutes) : 1. Use the IN key to set the snooze time (minute). Each pressing of the key will increase the snooze 39 2. time by 5 minutes. The snooze can also be set OFF when the "OFF" digit is being displayed. Confirm with the SET key and enter the "ºC / ºF temperature display setting" or exit the manual setting mode by pressing the CH or SNOOZE key. Note : If the snooze time has been set "OFF", the snooze function will not be activated. °C/°F TEMPERATURE DISPLAY SETTING Flashing The default temperature reading is set to °C (degree Celsius). To select °F (degree Fahrenheit) : 1. The "°C" will be flashing, use the IN key to toggle between "°C" and "°F". Once the desired temperature unit has been chosen, confirm with the SET key and enter the "Weather Forecast Icon Sensitivity setting" or exit the setting mode by pressing the CH or SNOOZE key. WEATHER FORECASTING ICON SENSITIVITY SETTING For locations with rapid changes of weather conditions, the threshold can be set to a different level for faster display of weather conditions. Digit flashing 1. Using the IN key to set the weather sensitivity level. There are 3 levels of setting: 1, 2 and 3; level 1 is the most sensitive setting, level 3 is the least sensitive setting (default setting is "2"). 40 2. Confirm with the SET key and exit the Manual settings. ALARM SETTING : Alarm icon Alarm time 1. 6. Press and hold down the AL1 key for about 3 seconds until the alarm time display flashes. Use the IN key to set the hours and the OUT key to set the minutes. Pressing these keys continuously moves the hours consecutively by 1 hours and the minutes consecutively by 5 minutes. Either press the AL1 key once more to confirm and return to the normal display or do not touch any buttons for about 15 seconds to confirm the set time. To activate the alarm function, press the AL1 button once for Alarm 1. [. . . ] The mounting surface can, however, affect the transmission range. If for example the unit is attached to a piece of metal, it may then either reduce or increase the transmitting range. For this reason, we recommend not placing the unit on any metal surfaces or in any position where a large metal or highly polished surface is in the immediate proximity (garage doors, double glazing, etc. ). Before securing in place, please ensure that the Weather station can receive the 433MHz signal from the Thermo-hygro transmitter at the positions that you wish to situate them. CARE AND MAINTENANCE · · · Extreme temperatures, vibration and shock should be avoided as these may cause damage to the unit and give inaccurate forecasts and readings. [. . . ]