User manual LA CROSSE TECHNOLOGY WS9500

[. . . ] Hand held Anemometer Operating Manual Introduction: Congratulations on purchasing this pocket-sized anemometer, this innovative product provides wind speed, wind chill and temperature information for any outdoor activities. The operation of this product is simple and straightforward and by reading this operating manual, users will receive the optimum benefits of all its features. Wind chill The anemometer calculates automatically wind chill, which can provide useful information for preparing outdoor activities in cold weather. [. . . ] Checking the correct polarization, insert 1 x 3V (CR2032) lithium cell, positive (+) pole up into the battery compartment and replace the cover. When the battery is inserted, all the segments of the LCD and back-light will light up briefly. Lithium cell (CR2032) Your anemometer is now operational. Battery cover Note: After inserting the battery, test the anemometer by blowing directly at the Impeller for about 30 seconds. If it is not the case, remove the battery. Wait for 30 seconds, and re-insert the battery again. Fastening the necklace The carry necklace is supplied with the anemometer. To fasten, simply insert the clip of the necklace into the buckle end of the anemometer until it clicks into place. To unfasten, simply press both sides of the clip until it can be removed from the buckle. Function keys: The anemometer uses the following keys: MODE/ key : : : : : : : To toggle between wind speed and temperature/wind chill display Power ON/OFF To enter the setting node Back-light-On To change operation mode To change parameter in setting mode Back-light-On Battery change: It is recommended to replace the battery in the unit on an annual basis to ensure optimum accuracy of this unit. Please help in the preservation of the environment. Return used batteries to an authorised depot. + Key (PLUS) Maintenance: · · · · Avoid placing anemometer in areas prone to vibration and shock as these may damage and inaccurate readings. [. . . ] No part of this manual may be reproduced without written consent of the manufacturer. Temperature and Wind chill Mode The Temperature and wind chill modes can be selected into 2 different displays at any time. Temperature Wind chill By pressing the "+" key the display will toggle between temperature and wind chill. When the temperature is outside the range from ­29. 9°C to +59°C, there will be no wind chill measurement. [. . . ]