Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual LA CROSSE TECHNOLOGY WS9850. We hope that this LA CROSSE TECHNOLOGY WS9850 user guide will be useful to you.
Lastmanuals help download the user guide LA CROSSE TECHNOLOGY WS9850.
Manual abstract: user guide LA CROSSE TECHNOLOGY WS9850
Detailed instructions for use are in the User's Guide.
[. . . ] The outdoor temperature should then be displayed on the Temperature station. If this does not happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1. In order to ensure sufficient 868 MHz transmission however, this should under good conditions be a distance no more than 100 meters between the final position of the Temperature Station and the transmitter (see notes on "Positioning" and "868 MHz Reception").
When more than one transmitter is to be used 1. User shall remove all the batteries from the temperature station and transmitters and wait 60 seconds if setting has been done with one transmitter before.
51
2. [. . . ] To install and replace the batteries, please follow the steps below: 1. Insert the batteries, observing the correct polarity (see marking). Replace the battery holder to the unit.
56
Note: In the event of changing batteries in any of the units, all units need to be reset by following the setup procedures. This is because a random security code is assigned by the transmitter at start-up and this code must be received and stored by the Temperature Station in the first few minutes of power supplying.
BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units. (Battery life see Specifications) Please participate in the preservation of the environment. Return used batteries to an authorized depot.
57
FUNCTION KEYS:
The Temperature Station has only two easy to use function keys.
SET/ CH key
+ key
58
SET/CH key (Setting/Channel) · Press and hold for about 3 seconds to enter the Manual setting mode. · Press shortly to toggle between different channel readings.
·
+ key Press to make adjustment in the setting mode.
59
LCD SCREEN AND SETTINGS:
Low battery indicator (temp station) Time Indoor Temperature in °C Temperature icon (Weather man icon) Outdoor Channel No. Outdoor Temperature in °C Low battery indicator (transmitter) Outdoor Reception Signal icon*
60
Daily Min & Max Outdoor temperature
* When the signal from the transmitter is successfully received by the Temperature Station, this icon will be switched on. (If not successful, the icon will not be shown on the LCD). User can therefore easily see whether the last reception was successful ("ON" icon) or not ("OFF" icon). On the other hand, the short blinking of the icon shows that a reception is being done at that time. For a better display clarity, the LCD screen is split into 4 sections. Section 1 - TIME · Display of time (manually set). Section 2 - INDOOR TEMPERATURE · Display of indoor temperature.
61
Section 3 WEATHER MAN ICON · Display of the current temperature condition in form of one of the five weather icons (featured by Weather man) which change their appearance depending on the current outdoor temperature. Section 4 - CURRENT OUTDOOR TEMPERATURE AND DAILY MIN AND MAX OUTDOOR TEMPERATURE · Display the current temperature. · Display the daily outdoor minimum and maximum temperature of the currently selected channel.
62
MANUAL SETTING:
In normal display , press and hold the SET/CH key for 3 seconds to enter the manual setting mode. °C/°F TEMPERATURE UNIT SETTING User may choose to display the temperature readings in °C (degree Celsius) or °F (degree Fahrenheit): 1. Press and hold the SET/CH key in the normal display for about 3 seconds, the digit "°C" will be flashing.
flashing
63
2. 3.
Press the + key to select the unit as °F or °C. Confirm by pressing the SET/CH key to enter the 12/24 hour time display setting.
12 / 24- HOUR TIME DISPLAY SETTING AND TEMPERATURE UNIT (°C/°F) SETTING User may choose to display the time in 12-hour or 24-hour mode: 1. The "12h" or "24h" digit will be flashing.
flashing
64
2. 3.
Press the + key to set the desired time display mode. [. . . ] All electronic instruments must from now on be recycled. User shall take an active part in the reuse, recycling and recovery of the electrical and electronic waste. The unrestricted disposal of electronic waste may do harm on public health and the quality of environment. As stated on the gift box and labeled on the product, reading the "User manual" is highly recommended for the benefit of the user. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LA CROSSE TECHNOLOGY WS9850
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual LA CROSSE TECHNOLOGY WS9850 will begin.