User manual LA CROSSE TECHNOLOGY WT-5360 62U CO

[. . . ] WT-62U Digital Window Thermometer Features: · · · · · Clear functional design Easy to read outdoor temperature from indoors Maximum and minimum values with auto reset Easy to mount Weather resistant Specifications: Measuring range: Resolution: Temperature Updating Interval: Battery: Inserting the Battery: 1. The battery cover is located on the back of the thermometer. Using your fingers slide the battery cover off of the battery compartment. Observing the correct polarity insert one AAA battery into the battery compartment. [. . . ] If only batteries are used, the projector will only be activated when a button is pressed. The projection is a red light, not harmful under normal usage, although care should be taken to not look directly into the light. Notes: · · · · · · · · · · After the batteries have been installed, the LCD will activate, and you will hear a beep. The indoor temperature will be displayed, and the time will appear as "12:00 AM". The function buttons are labeled (from left to right): AL/HOUR, light intensity, light direction, MODE/MIN, and SNOOZE (the top bar). Light Intensity Icon Light Direction Icon C. TIME ZONE SETTING 1. Hold down the "MODE/MIN" button for 3 seconds; the time zone will appear and begin to flash in the bottom section of the LCD. Use the "MODE/MIN" button to toggle through the time zones and select the appropriate zone. There are 24 time zones to choose from (based relative to the international time standard of GMT (Greenwich Mean Time). Press and release the "SNOOZE" bar to confirm selection and advance to the next section of the set-up. 6 4. -4h -5h -6h -7h -8h -9h -10h -11h, -12h 0h -1h, -2h, -3h Atlantic Time Eastern Time (default setting) Central Time Mountain Time Pacific Time Alaskan Time Hawaiian Time Next two time zones West of HAW Greenwich Mean Time Three time zones West of GMT NOTE: The U. S. time zones will show abbreviations as opposed to the numerical time zone indicator. For example Eastern Time will display "ET" when the Eastern Time Zone is selected 5. Press and release the "SNOOZE" bar to confirm the time zone setting and advance to the Manual Time Setting. D. MANUAL TIME SETTING 1. Hold down the "MODE/MIN" button for 3 seconds, the time zone will appear flashing at the bottom of the LCD. Press the "SNOOZE" bar once to advance to set correct time (time will begin to flash). Press and release the "AL/HOUR" button to advance the hours, and press and release the "MODE/MIN" button to advance the minutes. NOTE: "AM" or "PM" will be displayed to the left of the time to help identify the time. Press and release the "SNOOZE" bar to confirm the time setting and to advance to the Year Setting. E. YEAR AND DATE SETTING 1. Hold down the "MODE/MIN" button for 3 seconds; the time zone will appear flashing at the bottom of the LCD. Press the "SNOOZE" bar 2 times to advance to the year setting. Press and release the "MODE/MIN" button to advance to the appropriate year. Press and release the "SNOOZE' bar to confirm the year setting and to advance to the Date Setting. NOTE: The year display will appear in set-up mode only and has a range from the years 2000 to 2049. Press and release the "MODE/MIN" button to advance to the correct month, and press and release the "AL/HR" button to advance to the correct day. [. . . ] To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. [. . . ]