User manual LA CROSSE TECHNOLOGY WT-62UC

[. . . ] Press the MODE button to enter the setting mode. The hours digits will flash in the center of the display. Press and release the + button to advance the hour. NOTE: When in the hours between midnight and noon, A. M. [. . . ] Install the batteries in the projection alarm clock. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES. NOTE: It is important to not press any buttons after inserting batteries as this will interrupt the WWVB search sequence. In this time the display will show the indoor temperature. If the station does not display the indoor temperature after the 15 minutes please retry the set-up as stated above. After the indoor temperature displays for 15 minutes you may place the projection alarm in your desired location. To complete the set-up of your temperature station after the 15 minutes have passed, please follow the steps beginning on page 6. 4 II. A. DETAILED SET-UP GUIDE BATTERY INSTALLATION 1. 5. Remove the battery cover on the backside of the projection alarm. Observe the correct polarity, and install 2 AA batteries. In addition to or instead of installing batteries, the AC adapter can be used. Simply plug the adapter into the receptacle on the underneath AC adapter side of the alarm clock, and then plug in the adapter. Press and release the "MODE/MIN" button to advance to the correct day of the week (MO=Monday, TU=Tuesday, WE=Wednesday, TH=Thursday, FR=Friday, SA=Saturday, SU=Sunday). Press and release "SNOOZE" bar to confirm selection and advance to the 12/24-Hour Clock Setting. 7 F. 12/24-HOUR CLOCK SETTING 1. Hold down the "MODE/MIN" button for 3 seconds; the time zone will appear flashing at the bottom of the LCD. Press and release the "SNOOZE" bar 5 times to advance to the 12/24-hour clock setting. Press and release the "MODE/MIN" button to select either a 12-hour clock or a 24hour clock. Press and release the "SNOOZE" bar to confirm selection and advance to the Indoor Temperature Display. G. INDOOR TEMPERATURE DISPLAY 1. Hold down the "MODE/MIN" button for 3 seconds; the time zone will appear flashing at the bottom of the LCD. Press and release the "SNOOZE" bar 6 times to advance to the indoor temperature display setting. Press and release the "MODE/MIN" button to select either Fahrenheit or Celsius (Fahrenheit is the default). Press and release the "SNOOZE" bar to confirm selection and advance to Daylight Saving Time setting. H. DST (DAYLIGHT SAVING TIME) SETTING Note: The DST default is "On", meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST "OFF". [. . . ] Be sure correct time zone and daylight saving time are selected. Note: For any questions not answered, contact La Crosse Technology with the contact information found at the end of this instructional manual. VII. SPECIFICATIONS FOR WT-5360 Temperature: Measuring range: Checking intervals: Power source: AC Adapter (included) Battery type: Battery life: Dimensions (L x D x H): Projection Alarm Clock 4. 6"L x 3. 67"D x 2"H (116. 7L x 51. 3D x 93. 1H mm) Input: 120VAC/60Hz Output: DC 6V/100MA 2 x AA, 1. 5V (alkaline recommended) (optional) Approximately 12 months, depending on projection and backlight use 32°F to 99. 9°F(0°C to +49. 9°C) with 0. 2°F(0. 1°C) resolution. NOTE: "OFL" will display when temperature is out of this range. Every 10 seconds WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. [. . . ]