User manual LACIE 12BIG RACK FIBRE 8 DUAL

[. . . ] LaCie 12big Rack Fibre 8 User Manual Table of Contents page 1 Table of Contents 1. System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LaCie 12big Rack Fibre 8 Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12big Rack Fibre Expansion Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 32 - Inserting the Power Cooling Module Disk drives are shipped installed in the enclosure with the anti-tamper locks engaged. To ensure the drives are installed correctly, follow the prescribed rules in section 2. 2. 2. Carefully insert the lock key provided into the cutout in the handle and into its socket (Fig. Rotate the key in a counter-clockwise direction until the "red" indicator is not visible in the aperture beside the key. 33 - De-activating the Anti-tamper Lock continued on the next page>> LaCie 12big Rack Fibre 8 User Manual Getting Started page 32 3. Release the Drive Carrier module handle by pressing the latch in the handle with your finger and rotating the handle towards the right (Fig. Gently withdraw the Drive Carrier module from the drive slot. 2. 4. 2. 2. Installing a Drive Carrier Module IMPORTANT INFO: All drive slots must have a Drive Carrier module or Dummy Carrier module installed to maintain a balanced air flow. IMPORTANT INFO: Ensure that the carrier is orientated so that the drive handle opens to the right. Fig. 34 - Unlatching a Drive Carrier Module 1. Release the carrier handle, by pressing the latch with your finger and rotating the handle towards the right (Fig. 36). continued on the next page>> Fig. 35 - Removing a Drive Carrier Module 2. Insert the Drive Carrier module into an empty drive slot in the Fig. 36 - Drive Carrier Module with Handle Release - SAS Drive Shown LaCie 12big Rack Fibre 8 User Manual Getting Started page 33 enclosure. Slide the Drive Carrier module, gently, all the way into the enclosure until it stops and seat it by pressing with your thumb on the left edge of the module (Fig. Secure the drive carrier by closing the handle until it fully engages. A click should be heard as the latch engages and holds the handle closed (Fig. Continue populating all the drives for your configuration. Any drive bay not being occupied by a populated drive carrier must have a dummy drive carrier installed. 2. 4. 2. 3. Engaging the Anti-tamper Locks The anti-tamper locks (Fig. 39) are fitted in the Drive Carrier handles and are accessed through the small cutout in the latch section of the handle. Drives are supplied with the locks set in the locked position. [. . . ] 2. 0 meters maximum length, if 18 AWG is used. NEMA 5-15P grounding-type attachment plug rated 120V 10A; or IEC 320 C14, 250V, 10A. IEC 320 C-13, 250V, 10A. Plug Socket Europe and Others Cord Type Socket Harmonized, H05-VVF-3G1. 0. IEC 320 C-13, 250V, 10A. LaCie 12big Rack Fibre 8 User Manual Standards & Regulations page 85 7. 6. [. . . ]