User manual LACIE 2BIG NETWORK 2-DISK RAID

[. . . ] 2big network Professional 2disk RAID Gigabit Ethernet user manual manuel utilisateur manual de instrucciones gebruikershandleiding guída utente handbuch LaCie 2big Network User Manual Table of Contents page Table of Contents Health and Safety Precautions General Use Precautions 1. Introduction to the LaCie 2big Network I want to: 1. 1. Views Of The Drive Front View/1-click Data Sharing Rear View 1. 6. Connecting with LaCie Ethernet Agent (Windows) 2. 4. [. . . ] The description only appears to the administrator as part of the Share Profile on this page. TeChNICAl NOTe: The share name cannot contain any of the following characters: \ / [ ] : | < > + = ; , ?Select Enabled from the Status menu to make the share accessible. Select Disabled to create the share but make it inaccessible. Figure 3. 6. 1 (continued on next page) LaCie 2big Network User Manual 4. Select "Enable public access" to make the share accessible in read/write mode to anyone. No password is needed to access the share. Select "Enable guest access" to require a password for read/write access. Anyone can access a "guest access" share in read-only mode. Select the protocols which will be used to access the share. You can choose from Windows , Apple (SMB), FTP or HTTP. administration page 3. 6. 2. Creating a Share from a USB Key To automatically create a share from a USB key, just connect the USB key to a USB port on the back of the 2big Network and push the big blue button on the front of the drive. The following things will happen: A new share will be created on the 2big (Fig. The share gets its name from the USB key. All data on the USB key will be copied to the new share. When you disconnect the USB key from the 2big the data will still be available because it has been copied to the 2big. NOTe: Shares created with 1-click data sharing (USB keys) are different from shares created by attaching exernal storage devices like USB hard drives. When a share is created by attaching a USB hard drive, the drive must be connected at all times for its data to be accessible. Shares created from USB keys with 1-click data sharing are created on the 2big and are always accessible. Figure 3. 6. 2 LaCie 2big Network User Manual 3. 6. 3. Deleting Shares On the Shares page, check the box beside each share you want to delete and click Remove. Deletion of the share could take just a few seconds to several minutes, depending on the size of the share. CAUTION: Deleting a share deletes all files contained within the share folder. Back up any data you want to save before deleting a share. administration page Figure 3. 6. 3 3. 6. 4. [. . . ] Read the User Manual and review the Troubleshooting section. If possible, make the drive the only external device on the CPU, and make sure that all of the cables are correctly and firmly attached. If you have asked yourself all of the pertinent questions in the troubleshooting checklist, and you still can't get your LaCie drive to work properly, contact us via the contacts on the following page. Before contacting us, make sure that you are in front of your computer and that you have the following information on hand: Your LaCie drive's serial number Computer brand and model Amount of memory installed Names of any other devices installed on your computer, including CD/DVD burners Information to Include in Email Correspondence Information 1. [. . . ]