User manual LACIE 2BIG TRIPLE 2-DISK RAID

[. . . ] LaCie 2big Triple User Manual Table of Contents page 1 Table of Contents Health and Safety Precautions General Use Precautions 1. FAST (RAID 0)­ Preconfigured mode of the 2big 3. 1. 2. Contacting Customer Support LaCie Technical Support Contacts 6. Warranty 3 3 5 6 7 8 8 9 10 10 10 11 12 13 14 14 16 18 19 20 20 20 21 21 22 23 24 24 28 29 30 30 31 32 33 34 35 LaCie 2big Triple User Manual Forward page 2 which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. [. . . ] On the first page of the "New Partition Wizard, " click Next. 2. 3. 2. A Setup page 16 CAUTION: Following these steps will erase everything from the 2big. If you have information that you want to protect or continue to use, back up this information before performing these steps. (continued on next page) Fig. 2. 3. 2. B LaCie 2big Triple User Manual 8. On the Format Partition window, select Quick Format. 2. 3. 2. C 13. Click Finish to begin the formatting process. 14. Windows Disk Management will format and partition the disk according to your settings (Fig. 2. 3. 2. D. ), and your drive will appear in My Computer, ready to use. Fig. 2. 3. 2. D ImpOrTANT INfO: Please refer to section 2. 3. 1. File System Formats, for a more detailed comparison of the various file system formats. LaCie 2big Triple User Manual 2. 3. 3. Connect the drive to the computer and turn on the drive. Select Utilities from the Go menu in the Finder menu bar. In the Utilities folder, double-click Disk Utility. Select the volume labeled LaCie Hard Disk from the list of available hard disks on the left side of the window. From the Volume Scheme: menu, choose the number of partitions you want to divide the drive into (Mac OS X gives you the option of dividing the drive into at most 16 partitions). You can adjust the size of each partition using the slide bar between the partitions in the Volume Scheme: area. In the Volume Information section, enter a name for each volume (partition), choose the volume format. Once you have finalized the volume options, click Partition. Click Partition again when the alert message appears to continue. Mac Disk Utility will format and partition the disk according to your settings, and your drive will be ready to use. Fig. 2. 3. 3. Setup page 18 CAUTION: Following these steps will erase everything from the 2big. If you have information that you want to protect or continue to use, back up this information before performing these steps. ImpOrTANT INfO: Please refer to section 2. 3. 1. [. . . ] Contacting Customer Support Before You Contact Technical Support 1. If possible, make the drive the only external device on the CPU, and make sure that all of the cables are correctly and firmly attached. LaCie drive to work properly, contact us at www. lacie. com. Before contacting us, make sure that you are in front of your computer and that you have the following information on hand: Information 1. [. . . ]