User manual LACIE 321 LCD MONITOR

[. . . ] LaCie 300 Series LCD Monitor User Manual Table of Contents page Table of Contents Forward Safety Precautions and Maintenance Health and Ergonomic Precautions Environmental Regulations Manufacturer's Recycling and Energy Information MonitorSpecifications 1. IntroductiontoYourLaCie300SeriesLCDMonitor 1. 1. Package Content 2. InstallingYourLaCie300SeriesLCDMonitor 3. UsingYourLaCie300SeriesLCDMonitor 3. 1. Remove monitor stand for mounting 3. 1. 6. Flexible arm installation 4. OSD(On-ScreenDisplay)ControlButtonFunctions 4. 1. [. . . ] OSDLOCKOUTwithBRIGHTNESS(only)control: To activate the OSD Lock Out function, press SELECT, then DOWN and LEFT buttons and hold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then DOWN and LEFT buttons and hold down simultaneously while in the OSD menu. BRIGHTNESS can be adjusted while in the lock out mode. (Continued on next page) OSD DOWN/UP OSD TURN OFF OSD LOCK OUT LaCie 300 Series LCD Monitor User Manual OSD Control Button Functions page (Continued from previous page) Symbol Menu title RESOLUTION NOTIFIER Explanation This optimal resolution is 1280 x 1024 (319 model), 1600 x 1200 (320 model), and 1600 x 1200 (321 model). If ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not at 1280 x 1024 (or 1600 x 1200 for the LaCie 320 and the LaCie 321). You can adjust the brightness and contrast directly. When this function is set to ON, you can adjust the brightness with LEFT or RIGHT , contrast with DOWN or UP buttons, while the OSD menu is off. The standard OSD can be accessed with the EXIT button. Selecting Factory Preset allows you to reset all OSD control settings (BRIGHTNESS, CONTRAST, BLACK LEVEL, IMAGE CONTROL, COLOR CONTROL SYSTEM, SHARPNESS, POWER MANAGER, OSD LEFT/RIGHT, OSD UP/DOWN, OSD TURN OFF, ) back to the factory settings. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button. HOT KEY FACTORY PRESET 4. 7. Information Symbol Explanation Provides information about the current resolution display and technical data including the preset timing being used and the horizontal and vertical frequencies. Indicates the model and serial numbers of your monitor. LaCie 300 Series LCD Monitor User Manual OSD Control Button Functions page 4. 8. OSD Warnings Explanation OSD Warning menus disappear with EXIT button. NOSIGNAL This function gives a warning when there is no Horizontal or Vertical Sync. After power is turned on or when there is a change of input signal, the No Signal window will appear. RESOLUTIONNOTIFIER This function gives a warning of use with optimized resolution. After power is turned on or when there is a change of input signal or the video signal doesn't have proper resolution, the Resolution Notifier window will open. This function can be disabled in the TOOL menu. OUTOFRANGE This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned on or there is a change of input signal or the video signal doesn't have proper timing, the Out Of Range menu will appear. TeChNICAl NOTe: If " CHANGE DVI SELECTION" is displayed, switch to DVI SELECTION. 4. 9. Advanced Menu Functions To access the advanced menu: 1. [. . . ] · Rotate the screen to 90° clockwise until you hear one click. · Refer to the Quick Start section, "Remove monitor stand for mounting" to insure correct installation of stand. LaCie 300 Series LCD Monitor User Manual Contacting Customer Support page 6. Contacting Customer Support Before You Contact Technical Support Read the User Manual and review the Troubleshooting section. If your question is related to monitor calibration, please refer to the Troubleshooting section of the LaCie blue eye pro User Manual. [. . . ]