User manual LACIE D2 BLU-RAY DRIVE

[. . . ] d2 Blu-ray drive USB 2. 0 & FireWire 400 user manual manuel utilisateur manual de instrucciones gebruikershandleiding guída utente handbuch LaCie d2 Blu-ray Drive User Manual Table of Contents Page Table of Contents Health, Safety & General Use Precautions Health & Safety Precautions General Use Precautions 1. Connecting Your LaCie d2 Blu-ray Drive 2. 1. Installing the BD/DVD/CD Burning Software 2. 2. Connecting via the USB 2. 0 Interface Cable 2. 3. b. [. . . ] Connect the FireWire 400 cable into the FireWire 400 port on the back of the LaCie Blu-ray Drive. Turn the drive on using the on/off switch on the back. Attach the other end of the interface cable to an available FireWire 400 port on your computer. XXXXXX . LaCie Ltd XXXXXX ber XXX Serial Num ON OFF XXXXXX LaCie Ltd. Serial Numb XXXXX er XXXX ON 4. To verify that your drive is correctly installed and communicating with your computer, follow these steps: Mac Users: In the Finder menu, click on About This Mac, then More Info. This will open the Apple System Profiler. Your drive should be listed under the Hardware category. Windows Users: Right click your My Computer folder and select Properties. Your drive should be listed. OFF TeChNICAl NOTe: For more information on FireWire connections, see the following pages: Page 12, FireWire 400 Page 26, FireWire Questions & Answers TeChNICAl NOTe: It is possible to connect your drive to a FireWire 800 port. The speed and functions of your Blu-ray drive will remain identical. FireWire 800 cable not provided. LaCie d2 Blu-ray Drive User Manual Using Your LaCie Drive Page 3. Inserting Discs A To insert a disc, push the Open/Close (A) button on your LaCie d2 Blu-ray Drive. When the disc tray opens, put the BD, DVD or CD media into the tray with the label side facing up. Make sure the BD, DVD or CD is correctly placed in the center of the disc tray. Push the Open/Close button (A) to close it. Do not attempt to force the door open, you will damage the drive. The power must be on in order to open the drive (ie the blue button must be lit). The drive must be on a flat surface to work correctly. To close your LaCie d2 Blu-ray Drive, press the Open/Close button on the front of the drive. Pushing the media tray closed is not recommended. CAUTION: Do not force the tray closed. Always remove discs before transporting the drive. Never move the drive while it is in operation. [. . . ] If possible, make the drive the only external device on the CPU, and make sure that all of the cables are correctly and firmly attached. If you have asked yourself all of the pertinent questions in the troubleshooting checklist, and you still can't get your LaCie drive to work properly, contact us via the provided Web link. Before contacting us, make sure that you are in front of your computer and that you have the following information on hand: Your LaCie drive's serial number Operating system and version Computer brand and model (to view, look in the Finder bar and select About this Mac) Amount of memory installed Names of any other devices installed on your computer, including BD/CD/DVD burners www. lacie. com/support Information to Include in Email Correspondence Information 1. The brands and models of other internal and external peripherals installed on my computer Where to Find Information Located on a sticker at the back of drive or on the original packaging Mac Users Click on the Apple icon in the menu bar and select About this Mac. [. . . ]