User manual LACIE DUPLI DISC DVD121

[. . . ] LaCie Dupli Disc DVD121 USB 2. 0 User Manual Table of Contents page Table of Contents Health and Safety Precautions General Use Precautions Media Precautions 4 5 5 1. Introduction To The LaCie Dupli Disc DVD121 1. 1. Front View - DVD-ROM And DVD±RW Drives 2. 3. 4. Setting Up Your LaCie Dupli Disc DVD121 3. 1. [. . . ] Once the initialization is completed and the 1. Copy menu is displayed, press the Down Arrow on the control panel five times to scroll to the 6. Place the source DVD into the source drive and press the ENT button select this function. The screen will display the following information during the Prescan process: Scanning - DVD xxxx. xx MB 0% d:xx. xx When the process is completed and the source DVD can be read correctly, the screen will show the following information: PreScan OK! 4. 7. Disc Info" The Disc Info function is used to display information, such as disc type and capacity, regarding the source disc. Once the initialization is completed and the 1. Copy menu is displayed, press the Down Arrow on the control panel six times to scroll to the 7. Place the source DVD into the source drive and press the ENT button select this function. 7. Disc Info The screen will display the following information during the Disc Info process: Disc Type: Capacity: DVD-ROM xxxx. xx MB LaCie Dupli Disc DVD121 USB 2. 0 User Manual Using Your LaCie Dupli Disc DVD121 page 4. 8. Select Source" The Select Source function is used to choose the drive for the source data. The default source drive is the top drive. Note that even if you change the source drive, only the top one can be used when connected in USB. 4. 9. Image" This menu option is not available with this model. 4. 10. Edit Track" The Edit Track function was designed to create a collection of audio tracks from various audio CDs onto one CD. This model only features the CD to CD and Close Session options. Once the initialization is completed and the 1. xCopy menu is displayed, press the Down Arrow on the control panel 9 times to scroll to the 10. Place the source audio CD into the source drive and a blank CD-R or CD-RW into the target drive and press the ENT button select this function. CAUTION: Do not open the DVD±RW tray while performing the Edit Track function. Doing so may cause an error and may close the session of the disc being recorded, rendering the disc unreadable. Press the ENT button again and the screen will display this information: Select Track: 1/10 03:25 In this screen, the "1/10" refers to the first of 10 audio tracks, and the "03:25" refers to the length of the audio track. You can use the Down Arrow button on the control panel to view additional tracks. Once the track that you would like to add is displayed, press the ENT button. [. . . ] During comparison the disc cannot be read. The system cannot read the contents of disc. The comparison results are not the same. The source disc doesn't contain any data. [. . . ]