User manual LACIE PHOTON20VISIONII

[. . . ] LaCie photon20visionII User's Manual How To Use This Manual How To Use This Manual In the toolbar: Previous Page / Next Page Go to Previous View / Go to Next View Go to Contents Page / Go to Precautions Page On the page: Click on the text within the Contents page to jump to information on that topic. Click on any red text to automatically jump to more information about that topic. Printing: While optimized for onscreen viewing, the pages of this manual are formatted for printing on 8 1/2" x 11" and A4 sized paper, giving you the option to print the entire manual or just a specific page or section. To Exit: From the Menu bar at the top of your screen, select: File > Quit. Icons Used In This Manual Italicized paragraphs feature an icon describing the type of information being given. Important Info: This icon refers to an important step that must be followed. Tech Note: This icon refers to tips to help maximize performance. Caution!This icon indicates a potential hazard, and gives tips on how to avoid them. LaCie photon20visionII User's Manual Foreword Precautions 1. [. . . ] Questions to Ask Possible Solutions 6. Troubleshooting page 33 Does the "CONTROLS LOCKED" This function allows you to prevent the current control message appear when you push the settings from inadvertently being changed. the OSD controls, push and hold the MENU button and button for 3 seconds ­ the "CONTROLS UNLOCKED" message will then appear. Press the AUTO button to automatically adjust your display image to its ideal setting. If you do not get the results you desire, adjust the image position manually using the H position and V position icon in the OSD. Check Control Panel > Display > Settings to see if the frequency or the resolution was changed. If it was, readjust the video card to the recommended resolution. The display image is incorrect. On the screen's background, are Press the AUTO button to automatically adjust your there vertical bars or stripes visible?If you do not get the results you desire, adjust the vertical bars or stripes manually using the CLOCK icon in the OSD. Is there horizontal noise appearing in an image, or are characters not being clearly portrayed?Press the AUTO button to automatically adjust your display image to its ideal setting. If you do not get the results you desire, manually adjust the horizontal bars using the PHASE icon in the OSD. Check Control Panel > Display > Settings and adjust your monitor to the recommended resolution, and adjust your display image to the ideal setting. Set the color setting higher than 24 bits (true color). Check to see that the signal cable is properly connected, and use a screwdriver to fasten the screws. Make sure that your video card is properly inserted in its slot. Check Control Panel > Display > Settings and set the color setting higher than 24 bits (true color). Is the screen color mono or abnormal? LaCie photon20visionII User's Manual The Problem The display image is incorrect. Questions to Ask Is the screen blinking?Troubleshooting page 34 Check to see if the screen is set to interlace mode. If it is, change it to the recommended resolution. Make sure that the power voltage is high enough. It has to be higher than AC 100-240V 50/60Hz. Check to see if the resolution is set at 1600x1200, or less than 512x360. [. . . ] Grayscale - An image type that contains more than just black and white, and includes actual shades of gray. In a grayscale image, each pixel has more bits of information encoded in it, allowing more shades to be recorded and shown. 4 bits are needed to reproduce up to 16 levels of gray, and 8 bits can reproduce a photo-realistic 256 shades of gray. Highlights - The lightest portions of an image. [. . . ]