User manual LACIE RIKIKI GO

[. . . ] LaCie rikiki go User Manual Table of Contents page 1 Table of Contents 1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Windows Users The process of formatting a drive on a computer running Windows XP, Windows Vista, or Windows 7 consists of two steps: (1) installing a signature on the drive, and (2) formatting the drive. These steps will erase anything that is on the disk. CAUTION: Following these steps will erase everything from the your hard drive. If you have information that you want to protect or continue to use, back up this information before performing these steps. Connect the drive to the computer via the interface port. Right-click My Computer and select Manage. From the "Computer Management" window, select Disk Management (located below the Storage group). If the "Initialize and Convert Disk Wizard" window appears, click Cancel. Windows will list the Hard Disks that are installed on the system. Locate the drive that is represented by the icon. Right-click the icon and select Initialize. In the box to the right that says Unallocated, right-click and select New Partition. . . On the first page of the "New Partition Wizard, " click Next. 06 LaCie rikiki go User Manual Formatting & Partitioning page 12 8. On the Format Partition window, select Quick Format. Click Finish to begin the formatting process. Windows Disk Management will format and partition the disk according to your settings (Fig. 08), and your drive will appear in My Computer, ready to use. Fig. 08 LaCie rikiki go User Manual Formatting & Partitioning page 13 3. 2. Mac Users CAUTION: Following these steps will erase everything from the your hard drive. If you have information that you want to protect or continue to use, back up this information before performing these steps. Connect the drive to the computer and turn on the drive. [. . . ] Check to see that the Hi-Speed USB 2. 0 drivers for both your host bus adapter and device have been installed correctly. If in doubt, uninstall the drivers and re-install them. Minimum System Requirements. Is the drive connected to a HiSpeed USB 2. 0 port on your computer?Does your computer or operating system support Hi-Speed USB 2. 0? LaCie rikiki go User Manual Contacting Customer Support page 20 6. [. . . ]