User manual LACIE STARCK MOBILE HARD DRIVE

[. . . ] User Manual Table of Contents page 1 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Connect the drive to the computer via the interface port. Right-click My Computer and select Manage. From the "Computer Management" window, select Disk Management (located below the Storage group). If the "Initialize and Convert Disk Wizard" window appears, click Cancel. Windows will list the Hard Disks that are installed on the system. Locate the drive that is represented by the icon. Right-click the icon and select Initialize. In the box to the right that says Unallocated, right-click and select New Partition. . . On the first page of the "New Partition Wizard, " click Next. 06 User Manual Formatting & Partitioning page 12 8. On the Format Partition window, select Quick Format. Click Finish to begin the formatting process. Windows Disk Management will format and partition the disk according to your settings (Fig. 08), and your drive will appear in My Computer, ready to use. Fig. 08 User Manual Formatting & Partitioning page 13 3. 2. Mac Users CAUTION: Following these steps will erase everything from the your hard drive. If you have information that you want to protect or continue to use, back up this information before performing these steps. Connect the drive to the computer and turn on the drive. Select Utilities from the Go menu in the Finder menu bar. In the Utilities folder, double-click Disk Utility. Select the volume labeled LaCie hard disk from the list of available hard disks on the left side of the window (Fig. From the Volume Scheme: menu, choose the number of partitions you want to divide the drive into (Mac OS X gives you the option of dividing the drive into at most 16 partitions). [. . . ] Check to see that the Hi-Speed USB 2. 0 drivers for both your host bus adapter and device have been installed correctly. If in doubt, uninstall the drivers and re-install them. Minimum System Requirements. Is the drive connected to a HiSpeed USB 2. 0 port on your computer?Does your computer or operating system support Hi-Speed USB 2. 0? User Manual Contacting Customer Support page 20 6. [. . . ]