User manual LC AUDIO EV-5000

[. . . ] 2 Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Ambient temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electromagnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In some cases they must be converted by the Microsoft® ActiveSync® program. DATA EXCHANGE VIA CARD READER You can transfer or synchronise data via ActiveSync®. This is also the correct method, in particular, if files are to be transferred that must be converted into a navigation system-readable format. However, if you wish to copy large quantities of data (MP3 files, navigation maps) to the memory card, these can also be stored directly to the memory card. Many computers already have memory card devices. Insert the card in this and copy the data directly to the card. Because of the direct access significantly faster transfer will be achieved. 18 ENGLISH RESETTING THE NAVIGATION SYSTEM There are two options for resetting the navigation system. SOFT RESET This option restarts the navigation system, without reinstallation being necessary. A soft-reset is often used in order to reorganize the memory. In doing so all programs that are running are interrupted and the working memory is reinitialized. Choose this option if your navigation system is not responding or working properly. Perform the soft-reset as follows: Screw off the end cap of the pointer and carefully press the point of the end cap into the Reset opening on the left side of your device. HARD RESET Warning: A hard-reset deletes all data on your appliance and causes a new initial installation. It is not necessary to install the software on your synchronisation computer again, however. The satellite signals are received by the antenna of the built-in GPS receiver, which must have a "line of sight" to at least 4 of these. in tunnels, between houses, in woods or also in vehicles with metal-coated windows) it is not possible to determine the position. The satellite reception however automatically picks up again as soon as the obstacle has been passed and there line of sight is reestablished again. slow walking) also limits the accuracy of the navigation. The GPS receiver consumes additional power. This is especially of concern, when running on batteries. To conserve power do not turn on the GPS receiver unnecessarily. However, you can also switch the device off by means of the On/Off switch in the case of a shorter interruption to your journey. Pressing the same switch again will activate a restart. The GPS receiver will also be reactivated at the same time, if navigation software is still active. Here, it can take a short time for the position to be updated again, according to the reception situation. [. . . ] 26 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Contents of the navigation CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 G Getting Started. . . . . . . . . . . . . . . . . . . . . . [. . . ]