User manual LEGO 5904

[. . . ] · Tech Display provides actual numeric radar frequency for any radar signal · New Programmable Bands (on/off), including International and North American settings. · Detects and decodes Safety Warning System messages · Includes new coiled SmartPlug If you've used a radar detector before, a review of the Quick Reference Guide on pages 4 and 5, and the Programming information on pages 12 and 13 will briefly explain the new features. If this is your first detector, please read the manual in detail to get the most out of your 5904's outstanding performance and innovative features. FCC Note: Modifications not expressly approved by the manufacturer could void the user's FCC granted authority to operate the equipment. Quick Reference Card Remove card along perforations BEL Pro 5904 Quick Reference Card There are 7 user-selectable options so you can customize your 5904 for your own preferences. [. . . ] NOTE: If you use Threat Display, the brief signal shown in the power-on sequence when you turn on your 5904 will also be in Threat Display: an X with a decaying numeric signal. K 24. 150 Tech Display shows one K-band signal at 24. 150 gigahertz. Note: Even long-time detector users will require a significant amount of time to get familiar with this new level of information about detected signals. 11 10 Programming There are 7 user-selectable options so you can customize your 5904 for your own preferences. The buttons labeled CITY and BRT are also used to enter the Program Mode, REVIEW your current program settings, and to CHANGE any settings as desired. The words PROGRAM, RVW, and CHG are located on the top of the detector, and are highlighted in colored graphics. Pages 14-16 explain each option in more detail. 1 To enter Program Mode, press and hold the CITY and BRT buttons for 2 seconds. (The unit will beep twice, and will display the word "Program"). 2 Then press the RVW button to review the current settings. (You can either tap the button to change from item to item, or hold the button to scroll through the items). 3 Press the CHG button to change any setting. (You can either tap the button to change from setting to setting, or hold the button to scroll through all the options). Note: The Tech Display feature is explained in more detail on page 11. City Mode Sensitivity City STD (Standard) In this setting, when you put 5904 in the City mode, X-band sensitivity is significantly reduced, to reduce annoyance from X-band intrusion alarms and motion sensors. (factory default) City LoX (Low X band sensitivity) In this setting, when you put 5904 in the City mode, X-band sensitivity is reduced more than the standard setting. This will reduce X band alarms from other sources even further, but also significantly reduces range to X band traffic radar. City NoX (No X band sensitivity) In this setting, when you put 5904 in the City mode, it will not respond to any X band signals. WARNING: Only choose this setting if you are absolutely certain that there are no X band traffic radar units where you drive. NOTE: These settings only apply when 5904 is operated in City mode. X-band sensitivity is not affected when used in "AutoScan, " or "Highway" modes. Power-on Sequence PwrOnSTD (Standard) In this setting, each time you turn on the 5904, it will display "BEL 5904, " "Laser, " "Ka-band, " "K-band, " "X-band, " "Safety, " and any changes to factory settings. (factory default) PwrOnFST (Fast power-on) In this setting, the RX55 will only provide a brief audible tone, and will display any nonfactory settings. AutoMute aMute ON (AutoMute on) In this setting, 5904's audio alerts will initially be at the volume you set, but after a few seconds, the 5904 will automatically reduce the volume level, to keep you informed, but not annoyed. (factory default) aMuteOFF (AutoMute off) With AutoMute off, 5904's audio alerts will remain at the volume you set for the duration of the radar encounter. 14 15 Details of Programming Bands BandsALL In this setting all radar, laser, and SWS frequencies are monitored. This is the factory setting, and it is highly recommended that you use your 5904 in this mode. BandsMOD In this setting, 5904 will warn you with an audible alert, and associated text message stating which band is turned off (i. e. [. . . ] If it exceeds the basic repair charge, you will be contacted with a quotation. If the additional payment is not received within 30 days (or if you notify us that you choose not to have your 5904 repaired at the price quoted), your 5904 will be returned, without repair. Payment can be made by check, money order, or credit card. Ship 5904 and Power Cord To: LEGO Customer Service Department Service Order Number ______________ 5442 West Chester Road West Chester, Ohio 45069 For your own protection, we recommend that you ship your 5904 postpaid and insured. [. . . ]