User manual LEGO STAR WARS MINI BUILDING SET

[. . . ] The Undo and Redo tools now include history support, so you can see exactly what actions will be affected. User Interface Use the CUI editor to convert dashboard panels from AutoCAD LT 2008 into ribbon panels that can be used in AutoCAD LT 2010. You can easily remove a command from the toolbar with an option on the rightclick menu. The right-click menu also contains a separator tool to help you organize your toolbar, and a toggle to display the Quick Access toolbar above or below the ribbon. 5 Use the CUI editor to create a unique Quick Access toolbar for every workspace. Quick View Tools In addition to the improved right-click menu, a flyout menu has been added at the end of the toolbar. This menu contains a list of command commands that you can quickly add to the toolbar. If you need a command that's not on this list, the "More Commands" option takes you right to the complete Command List in the CUI editor. [. . . ] You can even snap to key points on PDF geometry using familiar object snaps. 8 The Reference Panel The Reference panel on the Insert tab of the ribbon provides tools for you to attach and modify externally referenced files. You can control the display and plotting of reference frames and turn on or off the ability to snap to the referenced geometry. External References Clip The ability to clip an external reference is now fully functional in AutoCAD LT. Use this tool to show only the portion of the file that you need. PDF Underlays AutoCAD LT 2010 addresses one of the top Autodesk User Group International 9 Use the arrow-shaped grip on a clipped external reference to invert the clipping boundary. Open Open Reference is another AutoCAD LT 2010 command that was previously available only in AutoCAD. This tool enables you to select a referenced file and instantly open it in the appropriate program for that reference type. Now you can quickly open a referenced file without having to list it, remember its name, and browse your computer or server to find it. External References Edit In-Place In-Place Reference Editing, or REFEDIT, is now included in AutoCAD LT 2010. This feature enables you to edit an externally referenced drawing directly, without opening it in its own window. 10 Geographic Data If both the host drawing and the external reference drawing have a geographic location defined, a new option on the External References dialog box enables you to locate the attached xref relative to the host drawing using Geographic Data. A similar option for blocks is available in the Insert dialog box. so you can re-path the missing files. If you choose Ignore, the warning closes and takes no action. If you always want to ignore unresolved references, use the checkbox at the bottom to stop the warning from displaying again. This is a big improvement over previous versions, when you had to manually search for missing references by checking the command line when opening a file, scouring the drawing for the text strings identifying unresolved references, or looking in the External References palette. External References Unresolved References When you open a drawing that has unresolved references, a new tool helps identify the missing files. If you choose Update, AutoCAD LT opens the External References palette Annotation Annotations are an important part of any drawing, helping to communicate your ideas when lines, arcs, and circles aren't quite enough. Now, though, AutoCAD LT 2010 attempts to show you where the gap is with small red circles on either side of the opening. Drafting After selecting an edge grip on a hatch object, use the Ctrl key to cycle through editing options such as adding a vertex or converting a straight edge to an arc. 15 Measure Geometry The Distance and Area commands, along with other inquiry tools, have been combined into the Measure tool on the Utilities panel of the Home tab. cumulative distances, you can select the Multiple option after you pick the first point. The Arc option within the Multiple Distance tool enable you to measure the length of arc segments. The Radius option displays the radius of an arc or circle, while the Angle option measures the included angle of an arc, circle, two lines, or three points. The Area tool has been updated to highlight the regions included in the calculation. Areas that are to be subtracted from the total calculation are shown in a contrasting color. The Volume option is similar to the Area option, but includes a prompt to specify the height that will be used to calculate the volume. Drafting If you choose the Distance option and pick two points, AutoCAD LT displays the distance, Delta X, Delta Y, and the angle in the drawing editor. If you need 16 Convert Spline Objects Another new feature makes it easy to convert spline objects into polylines. Inside the Edit Spline command, the "Convert to Polyline" option asks for a precision value between 0 and 99. If the layer has a viewport color override, the color swatch has a white border. Behavior within the Select Color dialog box has also been improved. As you move the cursor over the color swatches, the arrow cursor and a black border are displayed in addition to the traditional white border. [. . . ] These large objects, however, are not backwards-compatible, so a new compatibility option has been added to the Open and Save tab of the Options dialog box. When the box is checked, object size limits from previous versions will be used instead of the new, expanded limits. New File Format The new file format used by AutoCAD LT 2010 offers improved save times, especially when saving files with lots of annotative objects. It also accommodates larger sizes for both individual objects and the overall drawing file. Drawing Management 22 Purge Tools Have you ever had a drawing full of zerolength lines and empty text objects?Nobody creates these on purpose, but these empty objects still increase the file size and can wreak havoc when you're trying to select other objects. [. . . ]