User manual LEICA D-LUX 4

[. . . ] LEICA D-LUX 4 Instructions LEICA D-LUX 4 Dear Customer May we take the opportunity of thanking you for having purchased this LEICA D-LUX 4. Please read the instructions carefully and keep them for future reference. Contents Safety instructions and precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Names of the components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] - When setting to [AUTO], the ISO sensitivity is automatically adjusted - The setting is not available when [INTELLIGENT ISO] is set. [ISO LIMIT SET] [AUTO] - [200] - [400] - [800] - [1600] - [3200] the brightness of the subject. The upper ISO sensitivity limit can be set. - The higher the value for the ISO sensitivity is set, the more camera shake is reduced but the amount of picture noise is greater. ISO] is set to [ON]. 50 [WHITE BALANCE] Select a setting that matches the recording conditions to adjust the colour rendition for a more natural picture. Automatic adjustment Outdoors, clear sky Outdoors, cloudy sky Outdoors, in the shade Flash only Incandescent light Present white balance 1 Present white balance 2 Present colour temperature Auto white balance: White balance is set automatically. If multiple light sources are present or there is nothing of a white colour, auto white balance may not work properly. In these cases, set the white balance to a mode other than . Adjusting white balance manually: or and then press u. Aim the camera at a sheet of white paper. The frame in the centre must be filled with white paper and press [MENU/SET]. Select [WHITE BALANCE] and then press u. Press p (Green), q (Magenta), t (Amber), u (Blue) to adjust white balance and press [MENU/SET]. Setting the colour temperature: and then press u. Press pq to set 2500K or 10000K and press [MENU/SET]. - The optimal white balance will differ depending on the type of fluoyp rescent lighting being recorded under so use , or . - The set white balance is stored even if the camera is turned off. - The white balance fine adjustment setting is displayed in the picture when using the flash. - Select the centre point if the white balance is not finely adjusted. - Each white balance item can be fine adjusted independently. - The white balance fine adjustment level in you reset the white balance using , or . Type of optical measurement to measure brightness can be changed. [METERING MODE] Multiple The camera measures the most suitable exposure by judging the allocation of brightness automatically. This method is recommended. Centre weighted This is the method used to concentrate on the subject in the centre of the screen while still registering the whole screen. Spot This is the method to measure the subject in the spot metering area. [. . . ] 17, 44 Trimming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 76 USB Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 V Version Display . . . . . . . . . . . . . . . . . . . 47 Video Out . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]