Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual LEICA GHT196. We hope that this LEICA GHT196 user guide will be useful to you.
Lastmanuals help download the user guide LEICA GHT196.
Detailed instructions for use are in the User's Guide.
[. . . ] Application
GHM007 Instrument Height Meter and GHT196 Spacing Bracket are used together to simply, rapidly and reliably determine the height of the instrument (ground - tilt axis) for instruments with a tilt axis height of 196 mm. 2 m) 2 Measuring tongue 3 Identification plate 4 Reading window 5 Locking button
GHM007の主要部位
1 テープメジャー • 器械高用のコード付スケール (最長 The measurement is made at an angle from the spacing bracket to the point on the ground, but the result indicated is the perpendicular height from the point on the ground to the instrument tilt axis. [. . . ] Tip of the measuring tongue must always be in the centre of the point on the ground at the highest point. Always read height of the instrument in the reading window (A-side of the tape measure). Following completion of the height measurement, we recommend to remove the GHM007 and GHT196. Care and storage
Avoid soiling; if necessary clean tape measure with a soft cloth. Do not kink tape measure, do not oil and do no pack away wet. In the case of large temperature differences, note following table for precise measurements. Determining instrument height
Place tripod centrally over the point on the ground, level instrument. click GHT196 Spacing Bracket to tribrach. It must "snap" onto the cover over the adjusting screw. Swivel measure in the direction of the point on the ground, pull out until the tip of the measuring tongue touches the point on the ground, keep under tension and do not allow to sag, clamp if necessary. Read height of the instrument (ground - tilt axis) in the reading window at the red marking (in the example 1. Com
Ask your local Leica Geosystems agent for more information about our TQM program. [. . . ] Lengdeavvik [mm] : H instrumenthøyde [m] T temperatur under måling [°C]
Tekniska data
Systemnoggrannhet totalt: ±2mm Temperaturområde • Funktion: -20°C till +50°C (-4°F till +122°F) • Förvaring: -40°C till +70°C(-40°F till +158°F) Visad Instrumenthöjd gäller vid +20ºC. Com
Ask your local Leica Geosystems agent for more information about our TQM program. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LEICA GHT196
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual LEICA GHT196 will begin.
