User manual LENCO CS-173 DAB

[. . . ] OWNER'S MANUAL Mobile Audio System PLL Synthesizer Stereo Radio RDS (Radio Data System) operation DAB (Digital Audio Broadcast) Operation Digital Compact Disc Player Automatically Memory Storing Fold Down Full Detachable Panel Preset Equalization Electronic Shockproof (ESP) Function Remote Control CONTENTS Installation Take out screw before installation DIN Front-Mount (Method A) Installing the unit Removing the unit DIN Rear-Mount (Method B) Using The detachable Front Panel Wiring Connection Operation Location of keys Switching on/off the unit and illumiating Faceplate Release Sound adjustment Loudness Display Equalization Vacuum fluorescent display Flashing LED Remote sensor ESP function Reset function Radio operation Switching to radio mode Selecting the frequency band Selecting station Automatic memory storing & program scanning Station storing 3 3 3 3 4 5 6 7 8 8 9 9 9 10 10 10 11 11 11 11 11 11 11 11 11 11 11 Pausing playing Previewing all track Repeating the same tracks playing all track in random Ejecting a disc MP3 operation Switch to CD (MP3) mode Ejecting a disc Selecting tracks in single step Selecting directory up/down Pausing playing Previewing all tracks Repeating the same track Playing all tracks in random Selecting tracks by AMS/MP3 button Display information Disc notes Specification Trouble shooting 14 14 14 14 14 14 14 15 15 15 15 15 15 15 15 16 17 18 19 RDS (Radio Data System) operation 12 DAB (digital audio broadcast) operation CD operation Switching to CD mode Selecting tracks 13 14 14 14 2 INSTALLATION Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. [. . . ] Press this button for several seconds (until 2ND beeps come out), current station is stored into the number button. 11 OPERATION RDS (RADIO DATA SYSTEM) OPERATION - Setting RDS mode Press AF button (3) and release immediately to switch on or off RDS mode. Whenever RDS is switch on, symbol "AF" appears on the display. Program name is displayed on receiving a RDS station. "AF" starts blinking if the broadcasting signal getting worse. "ALARM" will be displayed when an emergency broadcasting is received, meanwhile sound output level will be adjusted to the preset output level automatically when the volume control is set at minimum. - Regional Program Operation Press AF button (3) for several seconds to switch on or off region mode. Some broadcasting stations change their program from normal broadcasting to regional broadcasting for a certain time period. When region is on, the current listening program remains unchanged. When region is off, it allows the reception moves to the regional station. - Using PTY to Select Program PTY button (1) is operated as follows: PTY MUSIC group PTY SPEECH group PTY off PTY switch is shared as follows: PTY MUSIC group PTY SPEECH group PTY off While selecting PTY engagement, its selection is implemented by preset buttons as described in notes. When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY information is detected. If corresponding PTY information is not existed any more, PTY engaging is automatically exit to normal mode. Notes: When PTY mode is engaged, the According to above 2 allotted group, the preset number is used for PTY selection as follows: MUSIC group * POP M, ROCK M *EASY M, LIGHT M *CLASSICS, OTHER M *JAZZ, COUNTRY *NATION M, OLDIES *FOLK M SPEECH group *NEWS, AFFAIRS, INFO *SPORT, EDUCATE, DRAMA *CULTURE, SCIENCE, VARIED *WEATHER, FINANCE, CHILDREN *SOCIAL, RELIGION, PHONE IN *TRAVEL, LEISURE, DOCUMENT - Listening to Traffic Announcement TA button (2) is operated as follows: When pressed short, it is engaging whether TA mode on or off. When TA mode is on and a traffic announcement is transmitted: When the unit was in CD (MP3), it will switch temporarily to radio mode. Temporary switch over to an EON linked station when EON detects a traffic announcement on that other program. If the volume level was under the threshold point it will be raised to the threshold point. But the user changed the volume level, which was more than the threshold point (min. TA volume level), it will be set to the last level. When TA mode is on, TA of individual segment is turned on. When a TP station is received, TP of individual segment is turned on. TA interruption function The current traffic announcement is cancelled by pressing this key. When pressed long, it is selected 12 OPERATION EON TA LOCAL/EON TA DISTANCE mode. [. . . ] The unit cannot play a CD-R and CD-RW that is not finalized. (Please refer to the manual of your CD-R/CD-RW recorder or CD-R/CD-RW software for more information on finalization process). Depending on the recording status, conditions of the disc and the equipment used for the recording, some CD-Rs/CD-RWs may not be played on this unit. (see *1) *1: To have more reliable play back, please see following recommendations: a: Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x. [. . . ]