User manual LENCO CS-176

[. . . ] RANDOM BUTTON "RDM" INSTALLATION PRECAUTIONS · · Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the driver. Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration. Use only the supplied mounting hardware for a safe and secure installation. Be sure to remove the front panel before installing the unit. · · 3 English English 2 4 Mounting angle adjustment Adjust the mounting angle to less than 30°. MOUNTING EXAMPLE Installation in the dashboard A B Notes: · · · Do not press the front panel hard against the unit when attaching it. [. . . ] "AF/REG" function(ALTERNATIVE FREQUENCIES) When press short, AF/REG switching mode is selected. When AF/REG switching mode is selected, the radio checks the signal strength of the AF all the time. When press long, it is activated as regional mode ON/OFF. -Regional mode ON: AF switching or PI SEEK is implemented to the station which have all PI codes same as current station. REG segment is turned on in LCD display. 7 English (B) CD/MP3/SD/MMC/USB MODE By pressing this key, user can execute search function. English 8 2 -Regional mode OFF The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented. 6. "TP" function(TRAFFIC PROGRAM) When press short, it is activated as TP mode on or off. When TP mode is on and traffic announcement is transmitted. -When the unit is in CD/MP3 mode, it will switch to radio mode temporarily. -If the volume level was under the threshold point, it will be raised to the threshold point. -When TP station is received, TP segment is turned on in LCD display. (C)SUB WOOFER Press "BND" W button for more than 2sec. will open SUB LINE-OUT in any modes, and the LCD will display "SUB W". Pressing long this button once to exit the mode. 11. AUTOMATIC OR MANUAL TUNING (FREQ UP : OR FREQ DOWN 9 ) (A) RADIO MODE When press less than 1 sec, they are operated as SEEK tuning mode. When press longer than 1 sec. , they are operated as MANUAL tuning mode. (B) CD/MP3/SD/MMC/USB MODE When press less than 1 sec, they are operated as TRACK UP/DOWN mode. When press longer than 1 sec. , they are operated as FORWARD or REVERSE mode. ` 7. "PTY" function(PROGRAM TYPE) PTY MUSIC---PTY SPEECH---PTY OFF While selecting PTY type, its selection is impremented by select buttons as described in preset key. When PTY is selected, the radio starts to search corresponing PTY informa tion, and stops if the corresponding PTY information is detected. 12. DISPLAY(DSP) Selects radio frequency , clock display . With clock display selected, hold down the "DSP" button until clock display starts flashing. Rotate the volume knob to change minutes . Press "DSP" button to start the clock. (A) RADIO MODE By pressing shortly, the radio searches for each preset station. [. . . ] Filenumber search " filename search " exit search (1) Filenumber search When three digits of zeros are displayedin CD/USB/SD/MMC mode, it means ready to get the file number. You can press M1, M2, M3, M4, M5, M6 to select the track you want (as illustrated): - 0 0 0 - NUMBER OF TOTAL SONG IS LESS THAN 1000 - 0 0 0 0 - NUMBER OF TO TAL SONG IS MORE THAN 1000 When press M1, then the unit will display "*0 0 1" When press M2, then the unit will display "*0 1 2" When press M3, then the unit will display "* 1 2 3" . . . . . . (If number seat is exceed, automatic scroll) After select track you want, press "BAND" button to confirm and the unit start playback ( if there is no number, last song play). (2) Filename search Filemame search function requires only three characters. When filename search function starts, "A**" will be displayed, press "SEL" to enter into a or next field (as illustrated): A * * - - - - :start search mode (the unit display character "A" ) A B * - - - -: Next field (press "SEL" button, select "B" by pressing FF button, then blink "B") A B C - - - - :Last field (repeat the operation , then blink "C") · RESET Reset button(24) is placed on the housing. The reset button is to be activated for the following: RESET After select track you want, press "BAND" button to confirm and the unit start playback. [. . . ]