User manual LENCO DC-5102

[. . . ] DC-5102 User Manual Thanks for purchasing our digital camera products. Please read through this manual carefully before using the camera and follow the instructions to avoid any damages that may be caused to camera by improper operation. Please try to take pictures before you perform the formal recording or take photos of any important occasion. Please do test the camera beforehand to ensure that it functions well. [. . . ] 3. 7 The other settings 3. 8. USB (storage) & PC camera mode Storage mode ¡ ¦ £ You can also set the other functions in the menu PC--CAM mode: this camera can be used as a webcam. With this mode, you can download , delete and upload files. This camera can be also used as a removable disk. Turn camera on, press the MENU button, select the settings menu by pressing OK; 2. , scroll to USB Connection mode window£ , scroll to the required USB mode ¤ Changing the USB connection mode Page 12 of 32 NTSC or PAL can be selected. £ 1. Press the MENU button, then select the settings menu by pressing OK £ § 2. 3. 9 Auto power off You can set the time to auto power off in the menu. £ 1. Turn on the camera , press the MENU button , and select the settings menu £ § 2. 3. 10 Language scroll to "Auto Power Off" window to select the time to auto power off£ Page 13 of 32 £ 1. Press the MENU button , and then select the settings menu £ Change to TV Output: scroll to "TV mode" , scroll to the required TV mode 5. 3. 11 Power The battery shows on the LCD screen: empty Factors affecting battery life ¡ ¨ ¨ low full the frequency and time in using the LCD the frequency and time in using the flash light ¨ number of photos taken ¨ temperature(the battery life shortens in low- temperature environment ) Do not use manganese battery; Page 14 of 32 ¡ Attention ¢ £ 4. Press the OK button to confirm § 2. Press UP/DOWN button scroll to the language window£ to select the required language 4. Downloading Turn the camera on, and then connect to the computer with a USB cable. Then you can download and copy pictures, files and other data from the camera to your computer or from the camera to the memory card. If you are running Window 98, please install the camera driver first. After finishing downloading or uploading, ensure to disconnect the camera from the computer in a safely removal way. PC camera function This camera can be used as a PC camera after the camera driver is installed into your computer. Page 15 of 32 ¦ ¢ ¢ ¢ ¢ ¢ While the camera is turned on, do not take out the battery or re-install it, or else, the settings and the function will be affected. The following factors will consume the battery : While turning on the LCD screen, LCD screen stays in replay mode, Connecting the camera to the computer 5. 1 How to install the camera driver 1. Put the accompanying CD into the CD-ROM; 2. The installation interface automatically appears. The system will indicate when installation is finished Attention ¡ £ © £ 3. Click "Install Driver" to confirm installation 5. [. . . ] When you first insert the camera into the PC, the system will show "find new equipment", then it can install the driver of the camera automatically. The computer will identify the camera as removable disk. Remarks: After the first time, the computer does not need to install driver again. Note: Before connecting the camera to the computer, please confirm the camera has turned off. Page 28 of 32 Download the photos: After installing the driver system, the camera becomes a Removable disk. [. . . ]