User manual LENCO DC-521

[. . . ] Playback PICTURE mode Force flash: The flash is on in any environment. Auto flash: The camera determines if the flash should be used or not. No flash: The flash is turned off. SET 2 Flash indicator 3 4 5 Self-timer ISO Photo/Video counter Selected resolution Shows selected Self-timer setting Light Sensitivity setting Setup Photo mode: No. 12M = 4032x3024; 8M = 3264X2448 5M = 2560x1920; 3M = 2048x1536; 1. 3M = 1280x960; VGA = 640x480 Super fine. [. . . ] To avoid shaking of the camera a tripod is recommended. ) button to select Capture Mode and confirm by pressing the SHUTTER 3. Press the W( ) button to set the delay time: 10S Timer. The self-timer function is now ready for use. Aim at the object you wish to take photo. Press the SHUTTER button to take a photograph. The photo will be taken after the timer reaches the delay time of 10 seconds. The camera will beep during the delay time. Lens Focus range Macro mode Digital zoom Flash strobe LCD display White balance Video mode External memory card File format Self timer PC interface Power source 5. 8 Recording video clips 8. System requirement Operating system CPU RAM Interface CD Windows XP / Vista or above Mac 9. x or X. x Pentium III or above At least 64MB USB port 4x speed CD ROM or above 1. Press the MODE button to select the video clip mode ( ). For setting the resolution, Press MENU ( ) button and select Resolution, then press the SHUTTER button to confirm. Press the SHUTTER button to start recording video, press the SHUTTER button again to stop recording. The video clip will now be saved as an AVI file in the camera memory. 5. 9 Playback photographs 5. 3 Formatting the memory or micro SD card 1. Press the menu button ( ) in PHOTO or VIDEO mode. Select the setup mode by press the right button. Select the format icon by press the W( ) button and press the SHUTTER button to confirm. Select Internal memory or SD card and confirm with the SHUTTER button. 1. Press the( ) button to get into playback mode. The last picture or video clip taken will be displayed. Use the left or right buttons to flip through the pictures or videos 3. In full screen display, press the T( ) button to zoom in the photo. To view images in thumbnail, press the W( ) button. [. . . ] Depending on the distance to the object being photographed, use macro switch to adjust the distance. Select the flower symbol ( ) if you wish to take a close-up photograph (11cm ­18 cm). If you wish to take a video or a photograph of surroundings or people (0. 5m ­ infinity), set the macro switch to normal mode ( ). If you are not sure if there is enough lighting, turn on the automatic flash( ) by pressing the flash button. [. . . ]