User manual LENCO DF-1320

[. . . ] Plays slide show with MP3 music on the background. *Video files may not play properly if stored on a low speed card. After the content is stored on the target flash media; insert the media into the correct slot. The Digital Picture Frame has a USB port for connection to a PC (USB Slave) and a second USB port for connection to other devices such as a Flash Drive, USB card reader, or a camera (USB Host). [. . . ] Make sure you have at least one video on your memory card or your USB flash drive. A list of all movie files will be listed on the left side of the screen. The right side consists of the movie preview window and information display of the current movie. Use Up/Down arrows to select the movie and press Enter to play. Once a movie is playing, press the OSD button on the remote control. Play previous movie in the play list Play forward the movie by 2/3/4 times speed. Play backward the movie by 2/3/4 times speed. Play next movie in the play list Stop the movie and return to the play list Increase the size of the picture by 2/3/4/1 times. Listening to MP3 music Make sure you have at least one MP3 file on your memory card or your USB flash drive. A list of music files will be listed on the left side of the screen. the right side consists of the frequency chart and information status bar. The song information area is below the status bar. Use the Up/Down arrows to select the music file and press Enter to play. Press the Play/Pause button on remote control to play or pause the music file. Press the Stop button on the remote control to return to the list of music files. Playing a slideshow with music Ensure you have at least one picture on your memory card or your USB flash drive. Additionally, you must have one MP3 file saved on the selected memory card/USB/Internal Memory. A list of all files on the selected memory card or internal memory will be listed on the left side of the screen. the right side consists of the file information. Use Up/Down arrows to select a picture file and press Enter to enter a full screen photo (pause mode). Once an audio-slideshow is playing, press the OSD button. Play previous picture in the picture list Play next picture in the picture list Use the rotate function to change the picture orientation to either portrait or landscape. [. . . ] Symptom Cause Digital Picture The POWER connector to the unit Frame doesn't power is not securely inserted. on Corrective Actions Make sure you connect the AC adapter to the frame properly. When you connect the AC adapter to the frame and power up the unit, even without a memory card, you should see a blank screen. If you don't see the lit screen, check if the power is connected to the Digital Picture Frame and make sure it is securely attached. [. . . ]