User manual LENCO DVD-28 K

[. . . ] DVD VIDEO PLAYER User manual DVD-28 K DVD/VCD/CD/MP3 PLAYER DVD-28 K OPEN/CLOSE PLAY/PAUSE MP3 VCD DVD CD PCB REV PROG DOLBY D I G I TA L KARA KE PLAYBACK DECODER POWER ON OFF LRNP REMOTE SENSOR PREV STOP 1 MIC VOL NEXT 2 1 MIC 2 DOLBY VIDEO CD MP3 IMPORTANT-SAFETY INSTRUCTIONS Do not remove the cabinet cover , or you may be exposed to dangerous voltage. This product should be operated only from the type of power source The product Should be Situated away from the heat source Do not use this product near water. Power-supply cords should be routed The player is not used for a long period of time. Never push objects of any kind in to this product through openings . [. . . ] As for a SVCD disc or other disc, press this button to skip to the next track. ANGLE As for a DVD disc with Multi-angle, Press the button to view the picture from the different angle. Each time when press it , the picture will switch to another angle. RESUME During playback, press STOP Once, then Press this button to resume play back from the stopped point. Press this button to close the karaoke melody . It varies according To the different discs. SETUP Press this button, the SETUP screen will appear and wait for your setting. STOP As for a DVD disc, press this button once and the playback will pause, press this button Again to stop the playback. Asfor a non-DVD disc, press it once to stop the playback. TIME Press this button to enter the designated time. The player will skip to the designated time to play. LANGUAGE Press this Button to select the language of the disc. VIDEO (PDVD) Press this button to switch the System Of output signal of the DVD player (Progres Sive or interlace scan) SLOW Press this button to play in slow speed without sound. CLEAR Selects sound balance, tone controls and brightness level by pressing this button Clear input selections and cancel certain playback function. 3D Press this button to switch sound field effects. VOL+, VOLPress VOL- to decrease the volume. Each time when press it, the volume will decrease a volume unit. Each time when press it, the volume will increase a volume unit. N/P Press this button to switch the system of output signal of the DVD player (PAL or NTSC), Each time when press this button, the system will switch to another one. forward . Each time when press this button, the slow speed will change once. Finally it will return to the normal Playback. PBC Press this button to switch the menu Mode. [. . . ] When selecting OFF, the player will do nothing with the MIC input. For example, when playing a VCD2. 0 karaoke disc, choose AUTO to enable Auto A/D Detect Feature. C) AUDIO SETUP The audio setup options are illustrated below: u ECHO with karaoke model) Use the Up and Down arrow button to move the scroll and adjust the echo. 22 21 u BRIGHTNESS Use the Up and Down arrow button to move the scroll and adjust the brightness. u MIC VOL with karaoke model) Use the Up and Down arrow button to move the scroll and adjust the mi rophone volume. While the DVD player is in the normal playback mode, insert the microphones to use karaoke function , at the same time , select the set up menu to switch the on/off of karaoke , the volume of MIC and adjust of the ECHO. u CONTRAST Use the Up and Down arrow button to move the scroll and adjust the contrast. u KEY Use the Up and Down arrow button to move the scroll and adjust the key. u D) VIDEO SETUP The video setup options are illustrated below: HUE Use the Up and Down arrow button to move the scroll and adjust the hue. u SATURATION Use the Up and Down arrow button to move the scroll and adjust the saturation. 23 24 e) SPEAKER SETUP(with 5. 1 CH model) The speaker setup options are illustrated below: u u DOWNMIX Use the Up and Down arrow button to move the scroll and adjust the downmix. LT / RT: Choose this setting, sound will be like in a movie theatre if the original movie was encoded in the Pro Logic Dolby Digital format. l STEREO: Choose this setting, when 5. 1-channel sound playing, two channels of signals will be output from the left and right soundtrack; when 2-channel sound playing, stereo signal will be output. [. . . ]