User manual LENCO DVP-742 BROCHURE

[. . . ] When placing the DVD Player in a cabinet, allow about one inch of space all around the DVD Player for ventilation. SAFETY WARNING CLASS 1 LASER PRODUCT / KLASSE 1 LASER PRODUKT / LUOKAN 1 LASER LAITE / KLASS 1 LASER APPARAT / PRODUCTO LASER CLASE. INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. WARNING 1. To prevent fire or electrical shock, do not expose this Player to rain or moisture. 2. To avoid electrical shock, do not open the cabinet, no user-serviceable parts inside, refer servicing to qualified personnel only. [. . . ] It can also use the supplied battery pack to power. When the AC adaptor is connected to the unit and powered, the unit will be automatically powered by the AC power. AC adaptor Power cord To home power outlet To DC12V IN on the DVD player Important ! Always turn off the DVD Player before connecting or disconnecting the AC cord. Only use the AC adaptor supplied with this Player. If this fluid gets in your eyes, wash eyes immediately with large amounts of running water and get medical attention immediately. If the fluid gets on your skin or clothing, wash immediately with water. Caution! 1. When not using the battery pack, remove it and store in a cool place. Keep the battery pack free from smoke, steam, moisture, and dust. Using the battery pack under 0 C (32 F) or over 40 C(104 F) can cause reduced battery life. x 5 14 Playing a Disc Turning ON /OFF the player To Turn On The Player 1. Slide POWER on the Player to ON, this will put the Player on standby mode. 2. Press on the Player to turn on the power. 3. You can also press STANDBY on the remote control to turn on the power. To put the Player on standby mode Press STANDBY on the remote control. 3. When you reach the scene you want to mark, pres ENTER to confirm; and the underscore changes to a number (1, 2, 3, 4 or 5 ). s 4. Repeat the above procedure for a new scene. You can perform marker playback at any time by press MARK, and using i ng to select one of the marks, then pre sing on s the Player to start playing the book marked scene. The playback continues until the end of the disc. Repeat the above to play the other marked scenes. GOTO You can go directly to a desired chapter and play, or play at a desired point of time. Follow these steps : (A)To play a specific chapter 1. Press GOTO, use to select title (TT) and chap ter (CH) and enter the desir ed number. (B)To play from a specific point of time. Press GOTO, repeatedly press to move to the time display and it changes 00:00:00. Fill in the time (hour: minute: secon d). Press ENTER to confirm and start play. 5 17 Playing a Disc ZOOM 1. Press ZOOM repeatedly during playback or pause to enlarge (2X, 3x, 4x, ) or reduce (1/2, 1/3, 1/4) the image. [. . . ] SPDIF/RAW:select this when the digital audio output is connected to an external amplifier with Dolby Digital or DTS decoder which gives 5. 1 channel sound. SPDIF/PCM:select this when the external amplifier has no decoder. 5 25 Setting Video's Brightness, Contrast, Hue, Saturation 1. Press SETUP on the remote control. 2. Use the direction keys( ) to select VIDEO SETUP and its sub-menu. 3. Press ENTER to confirm your selection. [. . . ]