User manual LENCO DVP-75

[. . . ] Cleaning ALWAYS unplug the portable DVD Player before you clean it. Clean the portable DVD Player with a soft, damp (not wet) cloth. Ventilation The slots and openings on the set top box are for ventilation. Do not cover or block them as it may cause overheating. [. . . ] Be sure to place the batteries in the correct direction. It is dangerous to charge/heat/open or short-circuit the batteries. Do not leave dead or expired batteries or mix old/new batteries. When not using the remote control for a long time, remove the batteries. When operating range becomes reduced, replace all batteries with new, fresh ones. If leakage from the battery occurs, wipe the battery liquid from the battery compartment, then replace. 3 HOW TO REPLACE THE BATTERY STEP 1: PUSH THE BUTTON TOWARD LEFT; STEP 2: PULL THE BATTERY LOADER OUT C onnecting to a TV Set Connections Phone Jack Function Insert the earphone into the earphone jack, to listen the music or movie privately. Battery charging When the unit battery is powered out, connect the AC adapter onto the unit. the battery will charge automatically. Volume adjust Use VOLUME CONTROLL in the side of the unit to adjust the volume. 4 MP3/WMA/MPEG4 PLAYING Insert the MP3/W MA/MPEG4 disc, use navigation keys to open the desired directory. Use the navigation keys to select the desired track and then ENTER to play the file. Press the PLAY/PAUSE key to pause the playback, press the stop key to stop the play. To return to the upper menu, press navigation key to choose the icon Open the option menu using the navigation keys Filter: Allows selecting the categories of files displayed in the browser list. Repeat: To switch different repeat playing mode Select single option to enable one file repeat, select folder option to enable all the files in the folder repeat. Mode: Select different playing mode Normal: Normal playback Shuffle: Shuffle mode enabled. When playback reaches the end of the current chapter/track, playback jumps to a random chapter/track. Music Intro: In this mode, the unit will play the first 10 seconds of the file and then skip to the next file. Edit Mode: Use this option to enable programmed playback mode. Select the mode, press LEFT Navigation key to directory and press ENTER to choose the desired track and press Add to program to program the playback list. Brower view: Display playback list directory. Add to program: Use this in combination with Edit Mode to create a play list. Clear program: When entered the Browser View and in complete stop state (press STOP button twice), use this option in combination with Edit Mode to delete tracks from the playback list. and press ENTER to confirm. 5 PICTURE CD PLAYBACK SYSTEM SETUP MENU OPERATION Press the SETUP button on the remote control and the SETUP MENU will be displayed. [. . . ] Note: If you forget your password, please use the universal password 6666 to unlock. MISC SETUP Select MISC in the setup menu, and display the submenu: * Use Default Settings Reset data to factory default. 7 Specifications Play mode Disc mode NTSC/PAL DVD, VCD, CD, MP3, CD-R, CD-RW, JPEG, DVD+ -R/W, MPEG4, Other Output characteristic Display Device Screen Size Color TFT-LCD 7 inches 1Vp-p(75 ) 2CH DC IN 12V 15W 206x160x40mm 1. 0kg Video characteristic Video S/N ratio 65dB. 500 lines. Video output Audio output Power Voltage Resolution AV Out Audio characteristic Frequency response Audio S/N ratio Dynamic range Distortion D/A Converter fs 96KHz: 20Hz-20KHz:+/-1dBI 90dB 80dB < 0. 01% 96KHz/24bit Power consumption Size Weight Specifications are subject to change without notice. Accessories 8 Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Warning: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. [. . . ]