User manual LENCO DVT-2422

[. . . ] For more information and support, please visit www. When opening the box for the first time, please check whether all the accessories are present. Before connecting parts and power, please carefully read the user manual and always keep these instructions handy and close by your LCD TV. If anything damaged or lacked, consult with your local dealer . [. . . ] Note: The first time installation screen appears again, when the "reset" operation has been done, and then turn off and turn on the main unit. Make sure all necessary connections are correctly connected before turn on the power. The power indicator turns red and the unit is in the standby mode. Turn on the connected necessary external device. Turn on the power press [z] to turn on the main unit. Turn off the power Press [z] again can turn off the main unit. the unit is automatically set standby mode. The sleep timer automatically switches off the power after a preset time has elapsed. There are 9 time periods available, press [SLEEP] on the remote control repeatedly to select the desired sleep time: 0 Min v 15 Min v 30 Min v 45 Min v60 Min v 75 Min v 90 Min v 105 Min v 120 Min (The sleep timer starts when the setting is finished. ) To check the remain sleep time Press [SLEEP] on the remote control, the remain sleep time appears on the screen for a few seconds. This operation do no effect to the channels without NICAM signal. Once [I/II] is pressed, it alternates in the different sound options such as mono, stereo, dual I, dual II. After selected "ATV" as input source, you can do either one of followings to select your channel. The factory setting of OSD (On Screen Display) language is "English". Press [b/a] to set the language to your desired language. Press [ ] to go back the previous channel you've watched last time. Press [MUTE ] on the remote control to switch off the sound temporarily. Press this button again (or [VOL+]), the sound comes back. When some menu option is gray displayed, that means the option is not available in current setting mode. ) After setting of an option is finished, press [MENU] to exit stage by stage, while press [EXIT] to turn off OSD screen directly. (TV Menu is not available when "AV/S-VIDEO" is selected as input source. Expand the sub-menu stage by stage in turn: FUNCTION v Hotel Mode v Hotel Lock v . [. . . ] â· The DVD+R/+RW can be played back. However, some DVD+R/+RWs cannot be played back depending on the recording conditions. Note: While in other function, it alternate to "DVD" function and starts playback automatically when insert a playable disc into the disc in/out slot. [CD] Press [l] to stop the playing back disc temporarily, press this button again to resume playback. [. . . ]