User manual LENCO L-78 USB

[. . . ] Unpacking · Remove the record player and rubber mat from the packaging and remove all packing material. Setting up and preparing the device · Place the device on an even and stable surface. · Turn the white transport braces on the turntable until you can remove them. · Place the rubber mat on the turntable so that the spindle on the turntable pokes through the opening in the mat. [. . . ] "Default Sample Format": "16 bit"; the sample format used for CDs. Under "File Formats" "Uncompressed Export Format": "WAV (Microsoft 16bit PCM)"; the format with which audio CDs can be created later. Click on "OK" to save the settings. Listening to Monitor input via PC speakers 5. In the main Audacity window you will find a microphone icon beneath the output level indicators and next to it a button with a black arrow pointing downwards. Click on the arrow and select "Monitor input" in the dropdown menu. Green or red bars appear in the display above. You can now start recording. 14 E E You must select the setting "Monitor input" each time you record. The other settings are stored, although they may be lost when you disconnect the record player from the PC. Recording Check the system settings if you are unable to record despite making the correct settings under Audacity: For Windows XP the record player ("USB Audio CODEC") must be selected in the "Control Panel" under "Sounds and Audio Devices" / "Voice" /"Voice recording". Your sound card must be selected under "Sounds and Audio Devices" / "Voices" / "Voice playback" (not: "USB Audio Codec"). The same settings must be selected under "Sounds and Audio Devices" / "Audio" / "Sound recording" or "Sound playback". For Windows Vista the record player ("Microphone USB Audio Codec") must be selected in the "Control Panel" under "Hardware and Sounds" / "Sound" / "Recording". Your sound card must be selected under "Hardware and Sounds" / "Sound" / "Playback" (not: "USB Audio Codec"). You will find further information about the "Control Panel" in the Help for your operating system. Lift the cover until it clicks into place. Set the required rpm by pressing the 33 or 45 button. Remove the protective cap, if necessary, by pulling it downwards from the pick-up system. Push the tone arm locking lever to the right. Press the LOWER RAISE button to raise the tone arm. Guide the tone arm across the record to the track you wish to record. Press the LOWER RAISE button to lower the tone arm. The waveform of the recording is displayed on the screen. [. . . ] spike width" to set the maximum length of the click that is to be removed. Click on "Preview" to check the effect. Attention: Only use Effect with great care, otherwise parts of the recording will also be erased with the click. The window closes and Audacity removes the clicks. [. . . ]