User manual LENCO LED-2213

[. . . ] 22" (55. 5cm) Full HD LED TV WITH DVB-S Model No. : LED-2213 For information and support, www. lenco. eu Contents 1-3 SAFETY INFORMATION 4 5-6 7 8-11 12 13 14-21 Unit Remote Control Aerial connection Connecting external devices Auto installation setup Source menu Menu settings 21-35 DVBS Operation 36 37 TROUBLE SHOOTING GUIDE TECHNICAL SPECIFICATIONS options SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE. Take note of the following safety information which appears on the back of the TV. CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY COVER SCREWS, NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that there are important operating maintenance instructions in the literature accompanying this unit. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. Keep these instructions · · · · · · · Do not use this TV near water. Install in accordance with the supplied Quick Start Guide and this User Guide. [. . . ] (Can be selected in DTV mode) Allows you to select the Teletext language. (Can be selected in ATV mode) Turn on the blue screen display in no signal state by selecting "ON" (Can be selected in ATV mode) Press button, and enter the code to enter the submenu. The original code is 0000. System Lock Child Lock Key Lock Parental Change Code FTI (First Time Installation) Turn on/off the system lock function. Lock the channel, you have to enter the code to view the channel. Lock the buttons on the TV set, you could not operate the TV by the buttons on the TV set. Press button to enter the First Time Installation menu. 19 Menu Settings (continued) Use the and buttons to select the PC SETUP menu (as the picture above), press button to enter the menu. The PC SETUP menu includes the following options : H-Position V-Position Clock Phase Auto Adjust Adjust the transverse position of the screen. Adjust the vertical position of the screen. Adjust the pixel clock frequency, until the image size is maximized for the screen. Adjust the phase of the ADC sampling clock relative to the sync signal, until a stable image is obtained. Press button to setup the parameter of the screen automatically. 20 DVBS Operation 1 Main Menu All the important settings and features of your receiver can be operated in Main Menu. The Main Menu consists of four sub-menus which are "Installation", "System setting", "Channel Organizer" and "Multimedia". Press the MENU key when the menu is off, The MAIN MENU screen will appear 1. 1 Installation The installation menu contains three sub-menus; "Dish Setup", "Auto Scan" and "Transponder Manager". 1. 1. 1 Dish Setup You can select satellite set the parameter of satellite parameter and enter to install satellite submenu in this menu. 1. 1. 1. 1 Satellite Move the curser to the satellite you want to install. Press OK to select the satellite you want to install. Note: You must press OK to save changed date when the cursor is on the Satellite item before you select another satellite. 21 1. 1. 1. 2 Transponder You can select the current Transponder or add the new Transponder. 1. 1. 1. 3 Local Frequency You can change the local frequency. Note: You must press OK to save this local frequency when the cursor is on the Local Frequency item before you select another satellite. 1. 1. 1. 4 22K Tone You can change the 22k tone. Press LEFT/RIGHT select ON, OFF or AUTO. Note: You must press OK to save this 22K tone when the cursor is on the 22K Tone item before you select another satellite. 1. 1. 1. 5 Polarity You can change the polarity. Press LEFT/RIGHT select 13V, 18V, 13/18V or OFF. [. . . ] You can also use this screen to modify each value. EPG pre-recorded: the setting is the same as pre-recorded setting of timer. 2. 4 Selection Audio Language Press the AUDIO button on the remote control to select the audio language as show in. Press OK to make one selection. 2. 5 TELETEXT function In no-menu state, press TEXT. Press UP / DOWN to move up or down from the displayed page number. [. . . ]