User manual LENCO TFT-711 QUICK GUIDE

[. . . ] Please be aware that new software may change the functionality of the TFT-711. Should you experience any difficulties with the operation of your TFT-711, please consult the relevant section of this manual, including the Troubleshooting, or alternatively call your dealer or customer service adviser. Do not cover the TFT-711's ventilation openings with items such as newspapers, tablecloths, curtains etc. Do not place the TFT-711 on top of a unit that emits heat. [. . . ] 4 Auto Scan: you can change the items of region (Europe, Australia), whether the update mode (Append or Replace) before you decide start search. The region item (Europe, Australia) is decided by the signal of different country's broadcasting companies. Manual Scan: Select the channel number you want to search for by using the number buttons on the remote control or using Mode buttons to open soft digital keyboard. You can also change the items of region and update mode before you decide start search. Scan By NIT: Select NIT if you want to search on all of the transmitters connected to a specific network, focuses to Start Search and Press OK to start searching for channels. During the channel search procedure, the TFT-711 may download a large number of channels. This may include channels from various Service Providers, also those to which you do not have access unless you have a smart card from one of those Service Providers. If you select a program to which you do not have access, you will get a message on the screen. After search, press OK to save the new channel or press Menu if you don't want to save it. Sort Channel You can select how the channels shall be sorted in the TV and Radio lists. There are two sort mode (Name Up or Name Down) are used here. FullFrame will fill up the screen size with distortion. Auto will fit the screen size automatically. Standard: When the TFT-711 is connected to the TV channels, you may need to select the correct TV standard system. 16 System Information When you enter the System Information folder, you will find general information about which hardware and software version your TFT-711 is running on, you can also find the signal information and battery information about TFT-711. 17 At the battery information option, you can also select display or close the battery indicated icon at top-right corner on the screen. Save mode In order to save power when the TFT-711 at portable state, the screen's brightness can be adjusted or turn off. 14 Audio Channel: you can choose different audio channel modes here. 18 LEVEL: adjust the screen's brightness at 5 levels, 1 for the darkest, 5 for the highest, off for no save power. Close Screen at radio mode: set screen whether on or off when system at the radio mode. Select teletext pages using the number buttons on the remote control. You can also quickly move to the different page options shown on any page by pressing cursor left/right. [. . . ] When the battery indicated iron on the screen flashes or when you have not used the battery for a long time, you need to recharge the battery. If the battery power is still low after charging it, the battery may be reaching the end of its life and should be replaced. Close and in close screen power LED is modes on. You have forgotten your PIN code When the TFT-711 tries to find and store channels you get the message "No services". [. . . ]