User manual LENCO TFT-720

[. . . ] Introduction Thank you for choosing the 7" DVB-T Player. The unit applies the latest state of the art electronics and is designed for use in hotels, offices, vehicles or your home. The unit is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy setup. Please read all documentation prior to using this product. [. . . ] Place the unit on a soft and smooth surface with its back cover up to avoid scratching the screen. 2. Press the button located on the backside of the unit to unlock the battery pack and while pressing the button pull the battery pack out from the unit. NOTE: When attaching or detaching the battery pack, make sure to protect the LCD screen. - 13 - System Connections · · Before plugging the power cord into an AC outlet, make sure that all other connections have been made as described below. Always ensure that the unit, TV and any other electrical components are switched OFF before connecting to the unit. Power Supply Connection Connect the supplied adapter to the side of the unit in the jack marked "DC 12V IN". Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will not be used for a long time, disconnect the plug from the outlet. Connecting to a TV Use the audio/video cable to connect the audio/video output of the unit to the audio/video input of the TV. Ensure that you observe the color coding when connecting audio and video cables. In TV mode, it outputs an analog audio signal; in DVB-T mode, it can output both analog and optical digital audio signal. - 14 - System Connections Connecting to an Amplifier The unit can be connected to an amplifier. Plug the A/V cable into the audio jack on the left side of the unit and plug the other end into an audio input on the amplifier. Please refer to the equipment's manual before connecting. In TV mode, it can output an analog audio signal; in DVB-T mode, it can output both an analog as an optical digital audio signal. It can be connected to a digital amplifier. Connecting to a DC Adapter Connect one end of the specific DC adapter to the "DC 12V IN" jack on the left panel of the unit, and connect the other end to the cigarette lighter socket in the car as shown below: · · The power supply of the car is not suitable for charging the battery. Make sure the unit is not connected to the car adapter when the car is started. - 15 - System Connections Connecting a Headphone Connect the headphone to the headphone jack on the left side of the unit. When headphones are connected, the speaker will be turned off automatically Connecting to DVB-T Antenna The unit is designed with an antenna input jack. Plug the DVB-T antenna into the jack on the right panel of the unit to receive TV signal, then slide the DVB /TV selector to DVB, As shown below: - 16 - System Connections Connecting to external antenna Plug the provided external antenna into the TV signal input jack on the right panel of the unit, as shown below. Then slide the DVB /TV selector (left side of unit) to TV. Connecting to CATV antenna Connect one end of the provided connecting line to the TV signal input jack on the right panel of the unit, and the other end to the CATV cable, as shown below. Then switch the DVB /TV selector to TV (left side of unit). - 17 - TV Setup Preparation 1. Connect the unit to the external antenna or CATV connecting cord. Connect the unit to a power supply Turn on the power of the unit. Switch the DVB /TV on the left panel to TV. Press the TV SETUP button to enter the setup menu. Picture Setup Menu Press the TV SETUP button once to enter the Picture setup menu, as shown below: PICTURE COLOR BRIGHT CONTRAST 30 32 30 The items in the menu are used to adjust the brightness, contrast, and color of the screen. Press the SELECT or button to select the desired item. Then use the or button to adjust the value. You can adjust the items in this menu to compensate for environment influences or to setup the screen to your own preference. TV Setup Menu Press the TV SETUP button twice to enter the TV setup menu, as shown below: TV SETUP SYSTEM CHANNEL FINE SKIP MANUAL AUTO PAL B/G 28 487. 25UHF OFF OFF In the TV Setup menu, press the SELECT or 1. Channel Press the SELECT or the channel number. buttons to select item. buttons to select buttons to select SYSTEM, press the buttons to select CHANNEL, press the buttons to select - 18 - TV Setup 3. [. . . ] Use the and press the ENTER button to enter the below menu: to select Modify Press the directional or numeric buttons to select the desired item, press the button to enter. Press the EDIT button to enter the character or number list. In this list, press the directional buttons to select a character or a number, press the OK button to confirm input. Select Move to change the place of this channel in the list. [. . . ]